Abstract:In this study, pure cobalt oxide (Co 3 O 4 ) nanoparticles were synthesized using a simple hydrothermal approach. The effect of the reducing agent and reaction temperatures of the prepared products were examined. Co 3 O 4 is formed in the as-synthesized sample, at reaction temperature 190 °C was observed in the XRD pattern. The XPS survey scan spectrum showed the distinctive peaks of the Co and O elements and their valence states. FESEM and HRTEM revealed the particles as cubical in nature. Peak associated with the elements Co and O on the EDAX spectrum demonstrated the purity of the nanoparticles. Three electrode setups were used to measure the electrochemical properties of the synthesized nanoparticles. DTA curve corresponding exothermic peak at 225 °C and the crystallization of the final product was attributed for the third weight loss of 1.5 % in the temperature range of 280 °C to 450 °C. Formation of Co 3 O 4 was confirmed by the observed XRD diffraction peaks at 2 θ = 36.83°, 59.82°, and 65.30°, which correspond to h k l planes (311), (511) and (440), respectively. The high-resolution Co2p spectra showed two prominent spin-orbital peaks, 2p 1/2 and 2p 3/2 , at 796.37 eV and 781.81 eV, respectively. The increase in temperature causes the particle size to grow ranges between 20 and 70 nm and the average particle size distribution in the TEM image is 42 nm. The integral area of the CV curve was measured during the CV measurement and as the as-prepared Co 3 O 4 electrode displays specific capacitance values of 154, 126, 81, 65, and 49 Fg −1 at various scan rates of 10, 20, 50, 70, and 100 mVs −1 , respectively.

Preparation of Microsized Single-Crystalline Co 3 O 4 by High-Temperature Hydrolysis

Studies on the nanocrystalline Co3O4 by wet synthesis and its microstructure

Synthesis of Nano-Polycrystalline Coesite under High Temperature and High Pressure

Moderate temperature synthesis of nanocrystalline Co3O4 via gel hydrothermal oxidation

The Thermal Analysis, Crystal Growth And Structure Transformation Of Nano-Scale Tio2 Prepared By Ticl4 Hydrolysis

Synthesis and Their Physicochemical Behaviors of Flower-Like Co3O4 Microspheres

Controllable Synthesis of Co3O4 Octahedra with the Assistance of C2 O2-4

Controllable hydrothermal-assisted synthesis of mesoporous Co3O4 nanosheets

Synthesis of Co3O4 nanoparticles via an ionic liquid-assisted methodology at room temperature

Porous Co3o4 Microcubes: Hydrothermal Synthesis, Catalytic and Magnetic Properties

Preparation of Nanosized GdCoO 3 Powder Using Amorphous Heteronuclear Complex As a Precursor

The Synthesis and Characteristic of Co3O4 Nanocrystals

Preparation of nanosized La1−xSrxCoO3 via La1−xSrxCo(DTPA)·6H2O amorphous complex precursor

Morphology-controlled synthesis of Co 3 O 4 by one step template-free hydrothermal method

Micelle-assisted hydrothermal synthesis of the uniform Co3O4 nanorods and its chemoluminescence properties of CO oxidation

Preparation of nanosized LaCoO3 perovskite oxide using amorphous heteronuclear complex as a precursor at low temperature

Facile hydrothermally grown cobalt oxide (Co 3 O 4 ) nanostructures and their electrochemical performances

Preparation of MoO 3 powder by hydrothermal method

Synthesis and Characterization of Ca3Co4O9 Nanoparticles by Citrate Sol-Gel Method

General Synthesis and Phase Control of Metal Molybdate Hydrates MMoO4·nH2O (M = Co, Ni, Mn, N = 0, 3/4, 1) Nano/Microcrystals by a Hydrothermal Approach: Magnetic, Photocatalytic, and Electrochemical Properties

Hydrothermal synthesis of CeO2 nano-particles