Abstract:Flat heat pipes can effectively spread a concentrated high power heat source in a small region into a larger heat dissipation area, which is widely used in the thermal management of electronic devices. In this paper, two different sintered copper powder wick structures are designed to study the effect of porous column height on the heat transfer performance. The results show that the best performance is achieved at the 30% filling ratio under the 15 degrees C cooling water with all the porous columns contacting with the condenser. The heat power is 312.7 W and the thermal resistance is 0.192 degrees C/W. As the cooling water temperature increases, the evaporation rate increases, resulting in a decrease in the thermal resistance. But the decrease in temperature difference causes the decline in heat dissipation power. Through the visual observation, it is found that the porous column contacting with the condenser can not only play the role of support and liquid reflow pathway, but also serve as an effective evaporation area to improve the heat transfer performance. While the low porous column cannot transport the condensed liquid and is completely immersed by the liquid under the high filling ratio, which is difficult to promote evaporation rate. In order to improve the performance at air cooling situation, an integrated heat pipe combined the flat heat pipe and fin tubes is designed, which can achieve a heat power of 259.8 W and present excellent temperature uniformity. This research provides the guidelines to optimize the heat transfer performance of porous column wick structures.

Investigation of Heat Transfer Performance for an Integrated Heat-pipe Heat Exchanger Used for Electronic Components

Experimental Investigation on the Temperature Distribution Characteristics of the Evaporation Section in a Pulsating Heat Pipe

Investigation of Heat Transfer Enhancement for a Heat-pipe Heat Exchanger Used for Chips

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

An experimental study of a novel integrated heat pipe-heat sink for chip cooling

Experimental Study of Composite Heat Pipe Radiator in Thermal Management of Electronic Components

An experimental investigation on a novel high-performance integrated heat pipe–heat sink for high-flux chip cooling

An experimental study of a novel high-performance heat pipe for chip cooling of desktop computer

Experiment of Heat Pipe Thermal Performance

Experimental comparison and numerical study of flow and heat transfer characteristics of the pipe rows in heat pipe heat exchanger

THE EXPERIMENTAL INVESTIGATION OF PHASE CHANGE HEAT TRANSFER IN A FLAT PLATE HEAT PIPE

Experimental Investigation On Heat Transfer Performance Of Top-Heated Heat Pipe With Screen Mesh Wick

Visualization research on influencing factors of flat heat pipes

Theoretical and Experimental Study on Heat Transfer Characteristics of Water Heat Pipe

Investigation on Transient Behaviors of Flat Plate Heat Pipes

Experimental Investigation of Thermal Conduction Performance on Silicon-Based Micro Flat Heat Pipe

An Implementation Investigation on Hydrothermal Behavior of Heat Exchanger with a Novel Finned Tube Designed

Experimental investigation on a 0.5-metre-long aluminum flat heat pipe for thermal management in electronic devices

Assessing the performance of a gas-water heat exchanger based on micro-heat pipe technology

Investigation of Heat Transfer Performance of Double-Walled Pipes of Heat Exchanger for Power Plant Applications

Experimental Study on Thermosyphon Heat Sink for Cooling of Electronic Apparatus