Abstract:The local buckling behaviour and ultimate cross-sectional strength of tubular elliptical profiles in compression is examined in this study through numerical modelling. The numerical models were first validated against previous experimental data with good agreement observed, enabling an extensive parametric study to be performed. A total of 270 elliptical sections were simulated in order to examine the influence of cross-section aspect ratio, geometric imperfections and local slendernesses. The obtained ultimate capacities, load–deformation responses and failure modes are discussed. It was found that for lower cross-section aspect ratios the behaviour of the elliptical hollow sections (EHS) was similar to that of cylindrical shells across a number of metrics; however, as the aspect ratio increased, more plate-like stable postbuckling behaviour was observed. Imperfection sensitivity was found to decrease with increasing slenderness and aspect ratio. The influence of the shape of the initial imperfection on the strengths of the EHS columns was also assessed and was found to be generally limited. Finally, a design method has been proposed for Class 4 EHS members that reflects the reduction in capacity due to local buckling with increasing slenderness, but also recognises the improved postbuckling stability with increasing aspect ratio; the proposals were shown to provide safe and accurate predictions for the strengths of the EHS columns with nondimensional local slendernesses up to 2.5 and aspect ratios from 1.1 to 5.0.

Free-Torsional Stiffness of Locally Buckled Thin-Walled Cross-Sections with Open Profiles

A New Derivation of the Buckling Theory of Thin-Walled Beams

Elastic flexural-torsional buckling of thin-walled cantilevers

A General Theory for the Flexural-Torsional Buckling of Thin-Walled Members I: Energy Method

Flexural–torsional buckling of thin-walled beam members based on shell buckling theory

An Analysis of Current Stability Theories for Thin-Walled Members

LOCAL BUCKLING OF I-SECTIONS IN COMPRESSION AND BENDING

A General Theory about Flexural Torsional Buckling of Thin Walled Members

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Elastic Flexural-Torsional Buckling of Doubly Symmetric Web-Tapered I-Beams

Residual Stiffness Assuring Stability of Steel Structures

LOCAL BUCKLING OF THIN-WALLED HIGH STRENGTH STEEL COLUMNS WITH WEB STIFFENERS

Elastic buckling behavior of steel trapezoidal corrugated shear walls with vertical stiffeners

Buckling of laterally and torsionally braced beams

Optimal design of steel buckling-restrained braces considering stiffness and strength requirements

Local buckling and post-local buckling redistribution of stress in slender plates and sections

Numerical and Experimental Analysis of Buckling and Post-Buckling Behaviour of TWCFS Lipped Channel Section Members Subjected to Eccentric Compression

Experimental study on local stability of special-shaped HSS columns with single-corrugation

Linear buckling topology optimization of reinforced thin-walled structures considering uncertain geometrical imperfections

Local buckling and ultimate strength of slender elliptical hollow sections in compression