Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Linear buckling topology optimization of reinforced thin-walled structures considering uncertain geometrical imperfections

Topology Optimization of Tensegrity Structures Considering Buckling Constraints

Topology optimization for maximizing buckling strength using a linear material model

Finite Strain Topology Optimization with Nonlinear Stability Constraints

Reliability‐based topology optimization of continuum structure under buckling and compliance constraints

A novel reliability‐based topology optimization framework for the concurrent design of solid and truss‐like material structures with unknown‐but‐bounded uncertainties

Robust Topology Optimization of Graphene Platelets Reinforced Functionally Graded Materials Considering Hybrid Bounded Uncertainties

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

2D Minimum Compliance Topology Optimization Based on a Region Partitioning Strategy

Reliability-Based Topology Optimization of Thermo-Elastic Structures with Stress Constraint

Topology Optimization for Stable Non-Linear Structures

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Robust topology optimization under multiple independent uncertainties of loading positions

Uncertainty‐oriented thermoelastic topology optimization with stress constraint

Post-buckling optimization of bending-induced variable stiffness composite cylinders considering worst geometric imperfections

Multi-component topology optimization for thin-walled structures

A systematic topology optimization approach for optimal stiffener design

Topology Optimization of Multiscale Structures Considering Local and Global Buckling Response

A Moving Morphable Component Based Topology Optimization Approach for Rib-Stiffened Structures Considering Buckling Constraints

Two-material structure non-probabilistic reliability-based topology optimization against geometric imperfections with bounded field model