Abstract:Powder coatings are gaining popularity for their economic and environmental benefits. Additives (pigments) such as zinc phosphate enhance the anti-corrosive properties of coatings, but their behavior in powder coatings has not been extensively studied. In this study, zinc phosphate was incorporated into three powder coating systems: polyester clearcoat, polyester and epoxy coatings with filler BaSO4. Neutral salt spray and electrochemical tests (OCP, LPR, and EIS) confirmed that the anti-corrosive performance improved with the addition of zinc phosphate. The optimal additive dosage was determined to be 2% for all of the coating systems studied here, based on salt spray tests. Here, the time until failure increased by 1.5 to 2 times. Using electrochemical tests, an optimal additive dosage of 8% was found for the polyester clearcoat, while the other coating systems maintained an optimal additive dosage of 2%. Performance increased by as much as one order of magnitude based on resistance/impedance measurements. This suggested a synergistic effect between the additive and the filler. The passivation layer was confirmed by both X-ray diffraction and Raman spectroscopy. Based on the results and discussion presented in this article, the discrepancy was caused by different features of the two tests, such that the electrochemical tests probe the function of intact coatings, whereas salt spray measures only the corrosion spreading from the scribe. It is proposed that the two test methods characterize different aspects of the coatings, corresponding to their service conditions. This has theoretical and practical significance in the evaluation of anti-corrosive coatings. Other properties of the coatings, including adhesion, gloss, distinctness-of-image, and pencil hardness, were measured as per applicable standards and the conformance was verified.

The Research Progress of Phosphate Auti-rust Pigment

The Research Progress of Inorganic Anticorrosion Pigments

Study on Rustproof Activity of ZnO-P_(2)O_(5)-H_(2)O Reaction System Based Zinc Phosphate Pigment

The Research Advance of Preparation and Modification of Aluminum Tripolyphosphate

Development of Environmental Firendly Rust Inhibitive Pigment for Iron and Steel

Current State and Prospect of the Application of Phytic Acid in Metal Protection

Physico-chemical properties of anti-corrosion pigment based on nanoporous zeolite and zinc monophosphate

A Comparative Study on the Anti-Corrosive Performance of Zinc Phosphate in Powder Coatings

One Step Self-Heating Synthesis and Their Excellent Anticorrosion Performance of Zinc Phosphate/benzotriazole Composite Pigments

α -Zirconium hydrogenophosphate as nano-containers of 2 aminobenzimidazole for the corrosion protection of zinc in NaCl medium

RESEARCH PROGRESS IN YELLOW PIGMENTS OF RARE EARTH

Mass Preparation and Anticorrosion Mechanism of Highly Triple-Effective Corrosion Inhibition Performance for Co-Modified Zinc Phosphate-Based Pigments

One-step crushing & cladding technology and enhanced anticorrosion activity of Zn 3 (PO 4 ) 2 @AlH 2 P 3 O 10 pigment

RECENT ADVANCE IN TECHNOLOGY OF ANTI-OXIDATION COPPER POWDER

Anticorrosion Property of Alcohol Amine Modified Phosphoric and Tannic Acid Based Rust Converter and Its Waterborne Polymer-Based Paint for Carbon Steel

Application of Nanotechnology in Water-based Colorant

In-situ Bonding Technology and Excellent Anticorrosion Activity of Graphene Oxide / Hydroxyapatite Nanocomposite Pigment

Development and application of rust conversion coatings based on compound of polyphosphoric acid and tannin

Composition design and anticorrosion performance optimization of zinc molybdate pigments

THE DEVELOPMENT OF ZINC-RICH PAINTS

Hydrothermal In-Situ Synthesis and Anti-Corrosion Performance of Zinc Oxide Hydroxyapatite Nanocomposite Anti-Corrosive Pigment