Abstract:Many conductive fillers such as carbon black, carbon nanotube and graphene, have been developed to reduce zinc content for zinc-rich coatings, but very few of them could reduce zinc content by 10 % while maintaining the original corrosion protection ability. The carbon-based conductive additives have the issue of corrosion promotion after cathodic protection. In this study, low-cost iron based conductive additive, iron phosphide was used to reduce zinc content in environmentally friendly zinc-rich polyester powder coatings. We investigated the anticorrosive performance of the prepared coatings by open circuit potential, electrochemical impedance spectroscopy measurements and neutral salt spray tests. The corrosion products were analyzed with Raman spectroscopy, X-ray diffraction and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy. It was found that iron phosphide, due to its conductive nature, inert chemistry, activation function and barrier effect of the lamellar shape, can establish cathodic protection at a low zinc content of 45 wt% with an active protection period of 20 days. It can replace 10 wt% of zinc in 75 wt% zinc-rich polyester powder coatings while maintaining the original cathodic protection ability, as long as 86 days for a 40 mu m film. In addition, iron phosphide can significantly inhibit localized corrosion and decrease corrosion creepage by about 20 % during 2500 h salt spray tests. Moreover, a possible corrosion protection mechanism for iron phosphide in zinc-rich polyester coatings was proposed.

One Step Self-Heating Synthesis and Their Excellent Anticorrosion Performance of Zinc Phosphate/benzotriazole Composite Pigments

Mass Preparation and Anticorrosion Mechanism of Highly Triple-Effective Corrosion Inhibition Performance for Co-Modified Zinc Phosphate-Based Pigments

Hydrothermal In-Situ Synthesis and Anti-Corrosion Performance of Zinc Oxide Hydroxyapatite Nanocomposite Anti-Corrosive Pigment

Composition design and anticorrosion performance optimization of zinc molybdate pigments

Incorporation of NH4+ in Flower-Like Zinc Phosphate Pigment to Enhance the Corrosion Resistance of Waterborne Epoxy

α -Zirconium hydrogenophosphate as nano-containers of 2 aminobenzimidazole for the corrosion protection of zinc in NaCl medium

In-situ Bonding Technology and Excellent Anticorrosion Activity of Graphene Oxide / Hydroxyapatite Nanocomposite Pigment

Zinc Phosphate/Imidazole Composites Built on Coordinating Construction for the Syncretic Weatherability and Corrosion Inhibition Property

Impact of inhibitor loaded with pigments content on properties of inorganic zinc rich coatings

Fabrication of a Conductive Additive for the Anticorrosion Enhancement of Zinc-Rich Epoxy Coatings

Physico-chemical properties of anti-corrosion pigment based on nanoporous zeolite and zinc monophosphate

Characterization and performance of organic-inorganic composite zinc phosphate with nano-sheet structure synthesized by a composite reaction of sol-gel with silane modification

Efficacy of zinc and copper oxide nanoparticles as heat and corrosion-resistant pigments in paint formulations

Anticorrosion Properties of Composite Inhibiting Pigment Based on Natural Calcium Silicate and Zinc Monophosphate

Effective Adjustment of Crystallinity and Regular Anti-Corrosion Activity of Zinc Tungstate Pigments

One-Step Preparation and Characterization of Zinc Phosphate Nanocrystals with Modified Surface

Zinc-rich Polyester Powder Coatings with Iron Phosphide: Lower Zinc Content and Higher Corrosion Resistance

One-coat epoxy coating development for the improvement of UV stability by DPP pigments

Self-healing effect of epoxy coating containing mesoporous polyaniline hollow spheres loaded with benzotriazole

In Situ PANI Encapsulation of Zinc Powder Enhancing the Corrosion Resistance of Zinc-Rich Epoxy Coatings

One-step crushing & cladding technology and enhanced anticorrosion activity of Zn 3 (PO 4 ) 2 @AlH 2 P 3 O 10 pigment