Abstract:Wire explosion technique has been widely studied in recent years to produce nanoparticles of different materials due to the enormous outstanding characteristics of nanomaterials as well as the advantages of wire explosion technique 1 . In the wire explosion process for preparation of nanoparticles, the wire firstly melts, vaporizes and then generates a mixture of metal vapor and liquid droplets. The voltage reaches a peak amplitude and the current quickly drops because only a small amount of metal vapor ionizes at this moment. Then the metal vapor gets cooled down and starts the following growing process of nanoparticles. In this paper, following simulation is carried out with wire material of aluminum. In the first stage, the generation process of vapor particles is modeled and the relationship between the explosion temperature, resistive deposited energy, the size of the vapor particles and the parameters of the explosion is derived and compared with experimental data. We find the resistive deposited energy is below the ionization one and the size of the vapor particles at the moment of explosion increases as the explosion temperature and deposited energy increases. Base on the results of the first stage, the growing process of the metal vapor to nanoparticles is simulated by adopting nodal treatment. The three main growing process, including homogeneous nucleation, surface growth and coagulation, are investigated to predict the size distribution of nanoparticles. It shows that nuclei of small size are formed during nucleation process. The decrease of number density of vapor particles demonstrates that condensation plays a more significant role than evaporation in surface growth process. The size distributions of nanoparticles at different temperatures also demonstrate that the growing process of nanoparticles tends to be inactive when temperature becomes relatively low. The final size distribution of nanoparticles is compared with experimental data as well 2 .

Characterization of Cu-Zn Alloy Nanocrystalline Powders Prepared by Wire Electrical Explosion

One-step preparation of ultrafine Cu-Zn alloy powders by electrical explosion method

Growth And Characterization Of Cu-Catalyzed Zno Nanowires

Nano-sized Amorphous Cu–Zr Alloy Particles Prepared by Mechanochemical Reaction

Study on Characteristics of Nanopowders Synthesized by Nanosecond Electrical Explosion of Thin Aluminum Wire in the Argon Gas

Nanosize Powders of Zinc Oxide Produced by Electrical Explosion of Zinc Wires

Compositionally graded multi-principal-element alloy coating with hybrid amorphous-nanocrystalline structure by directional electrical explosion

Nano-powder Production by Electrical Explosion of Wires

Numerical Investigation on the Growth Process and Size Distribution of Nanoparticles Obtained Through Electrical Explosion of Aluminum Wire

Numerical Investigation on Nanoparticle Formation and Influence on Size Distribution in Wire Explosion Process

Synthesis of nanosize aluminum powders by electrical explosion of wire in the gaseous media

Preparation and microstructure of nano-sized Cu particles by mechanochemical reaction

Effect of deposited energy of wire electrical explosion in argon on characteristics of synthesized aluminum nanopowders

Nanopowder Production by Gas-Embedded Electrical Explosion of Wire

Synthesis of FCC structure Fe10Co25Ni34Cu23Al8 high-entropy-alloy nanoparticles by electrical wire explosion: For electromagnetic wave absorption

Magnetic and Structural Properties of the Nanostructured Cu50Ni50 Powders

Two Different Modes Of Wire Explosion For Nano-Powder Production

Study of nanopowder production by gas-embeded electrical explosion of wire

Electrical explosion of aluminum wire for preparation of nanoparticles: An experimental study

The Influence of Discharge Mode on Morphology of Al–Ni Nanoparticles Prepared by Underwater Electrical Wire Explosion

Structural Characteristics of Aluminum Nanoparticles Produced by Electrical Explosion in Argon