Abstract:Purpose Regular receiving coil quality assurance (QA) is required to ensure image quality of an MRIdian Linac system. The manufacturer provides a spherical phantom and positioning tube for single‐slice signal‐to‐noise ratio (SNR) and uniformity assessments. We aimed to improve imaging setup and coverage and eliminate inter‐scan variability by employing multi‐slice imaging of a stable phantom. Additionally, we strived to expedite analysis by developing objective, automated analysis software. Methods A 5300 mL cylindrical plastic bottle placed in plastic bins was scanned at isocenter using a spin‐echo sequence with NEMA‐recommended parameters and 18 axial slices, avoiding phantom repositioning. Acquisition was repeated with and without prescan normalization filtering and by saving uncombined element images. Obtained data were analyzed using custom open‐source MATLAB code. Signal and noise images were automatically assigned, and ROIs for SNR and uniformity calculations were defined using image thresholding. SNR and uniformity pass/fail decisions were made using baseline comparisons. Results The proposed method was successfully implemented as monthly coil QA for 3.5 years. Setup and scanning took 41 min on average for a coil set. Automated image analysis was completed in a few minutes. Signal intensity peaked around +90 or ‐90 mm for Torso or Head/Neck coil unfiltered images. Noise peaked and minimized SNR inside ±30 mm from isocenter, while maximizing it around ±130 mm. Prescan normalization smoothed signal response, reduced SNR and increased uniformity. Individual coil element image analysis identified their position, signal or noise response and SNR. SNR and uniformity pass/fail thresholds were set for already tested and new coils. Conspicuous and subtle Torso coil malfunctions were detected considering baseline deviations of combined and individual element results. Conclusions Our QA method eliminated observer bias and provided insights into coil function, image filtering performance and coil element location. It provided SNR and uniformity thresholds and identified faulty coil elements.

Comparison of Two Coils for MR Angiography Based on the SDNR Method

A Feasibility Study of Geometric-Decomposition Coil Compression in MRI Radial Acquisitions.

Quantitative Comparison Study on the SNR Method of Phased-array Coil in 3.0 T MRI

Unconventional Gradient Coil Designs in Magnetic Resonance Imaging.

A New Approach to Research Graphical Performance of MRI RF Coil Based on the Quantitative Comparison Method

Design of an insertable cone-shaped gradient coil matrix for head imaging with a volumetric finite-difference method

A Contrast Study of the Performance of Carotid Surface Coil and Volume Coil in 3.0T Neurovascular MRI

Impact of MR Coils Element Numbers on Image Signal to Noise Ratio

Imaging Quality of Small Aperture Orthogonal Phased-Array Coil in MRI: a Creatural Experiment

Comparative study of MRI image quality about small hole phase array coil and clinical flexibility coil in small animal

Selection and Application of Coils in Temporomandibular Joint MRI.

Evaluation of Common RF Coil Setups for MR Imaging at Ultrahigh Magnetic Field: a Numerical Study

Effects of Proximity and Noise Level of Phased Array Coil Elements on Overall Signal-to-noise in Parallel MR Spectroscopy.

Design and Testing of a 24-Channel Head Coil for MR Imaging at 3 T.

Receive coil quality assurance procedure and automated analysis for ViewRay MRIdian MR‐Linac

Signal-to-Noise Ratio Improvement by Bi-2223 Surface RF Coil in 0.3T MRI System

Comparative Analysis of Calculation Methods of Coil Sensitivity in Parallel MRI

A Novel Endorectal RF Coil for High Resolution MRI and Sepectroscopy of the Prostate*

Feasibility of Brain Imaging Using a Digital Surround Technology Body Coil: A Study Based on SRGAN-VGG Convolutional Neural Networks

SNR-optimized Approach for the Design of RF Surface Coils for Permanent MRI Systems