Comparative Analysis of Calculation Methods of Coil Sensitivity in Parallel MRI

Yiming Li,Bin Li,Mingli Qian,Longchen Wang

DOI: https://doi.org/10.3969/j.issn.1671-7104.2013.01.004

2013-01-01

Abstract:Calculation methods of coil sensitivity in parallel MRI were elaborated, compared and analyzed.

What problem does this paper attempt to address?

Self-calibrating Coil Sensitivity Profiles for Parallel Imaging Based on Anisotropic Diffusion.

Xiaofang Liu,Xiuzi Ye,Sanyuan Zhang,Feng Liu

DOI: https://doi.org/10.4304/jmm.5.6.580-587

2010-01-01

Abstract:Calibration of the spatial sensitivity functions of coil arrays is a crucial element in parallel magnetic resonance imaging (PMRI).In order to overcome the sensitivity miscalibration errors introduced by pre-scan calibration method and decrease the total examination time , a new self-calibrating method for estimating the coil sensitivity profiles was proposed i n th e paper . F rom a fully - sampled central region of a variable-density k -space acquisition, t he sensitivity calibration images were directly extracted , and then were adaptively smoothed by a new anisotropic diffusion scheme to extract encoding effects of coil sensitivities. When the estimated coil sensitivity profiles were applied to reconstruct the full Field-Of-View image from the uniformly under-sampled MR data when under-sampl e rate was greater than 2 , the experimental results showed that the quality of reconstruct ion image was evidently improv ed. Therefore, t h is self-calibrating method for calculating sensitivity profiles is suitable for much faster imaging in parallel magnetic imaging. Meanwhile, the paper suggest that the suitable number of central k-space lines for generating the internal reference images should be chosen between 8 to 20.
A Feasibility Study of Geometric-Decomposition Coil Compression in MRI Radial Acquisitions.

Jing Wang,Zhifeng Chen,Yiran Wang,Lixia Yuan,Ling Xia

DOI: https://doi.org/10.1155/2017/7685208

IF: 2.809

2017-01-01

Computational and Mathematical Methods in Medicine

Abstract:Receiver arrays with a large number of coil elements are becoming progressively available because of their increased signal-to-noise ratio (SNR) and enhanced parallel imaging performance. However, longer reconstruction time and intensive computational cost have become significant concerns as the number of channels increases, especially in some iterative reconstructions. Coil compression can effectively solve this problem by linearly combining the raw data frommultiple coils into fewer virtual coils. In this work, geometric-decomposition coil compression (GCC) is applied to radial sampling (both linear-angle and golden-angle patterns are discussed) for better compression. GCC, which is different from directly compressing in k-space, is performed separately in each spatial location along the fully sampled directions, then followed by an additional alignment step to guarantee the smoothness of the virtual coil sensitivities. Both numerical simulation data and in vivo data were tested. Experimental results demonstrated that the GCC algorithm can achieve higher SNR and lower normalized root mean squared error values than the conventional principal component analysis approach in radial acquisitions.
On evaluation of MRI coil excited radio-frequency fields inside multilayered spherical head phantom——DyadicGreen's function/MoM method

Ling XIA,Min-hua ZHU,Bin XU,Qing WEI,Feng LIU,Stuart CROZIER

DOI: https://doi.org/10.3785/j.issn.1008-973X.2007.05.035

2007-01-01

Abstract:This work presented a method for computation of magnetic resonance imaging (MRI) coil excited electromagnetic fields (EMFs) inside the human head. A head-sized, multilayered dielectric spherical head phantom with measured radial conductivity and permittivity profiles was constructed, and then DyadicGreen's function (DGF)-based method was used to calculate the EMFs inside the head phantom. This solution is suitable for calculation of EMFs excited by any radio-frequency (RF) resonators whose current distributions can be calculated by method of moment (MoM). The calculated EMFs can then be used to deduce MRI imaging parameters. Results show that the computation time of the proposed method is much lower than that of a full finite difference time domain (FDTD) calculation using a complex head model, and the computation speed is increased by more than ten-fold. Simulation demonstrates that the magnetic and electric fields in human head are affected by the frequency, and that field/tissue interactions increase with the frequency increases, and that the inhomogeneity of the magnetic field in human head increases, thus resulting in the distortion of MR signals. The proposed DGF/MoM method can be used for high field MRI coil design, for example, the rapid evaluation of RF resonator (surface and volume coils) and high performance gradient system designs.
MRI Coil Design Using Boundary-Element Method with Regularization Technique: A Numerical Calculation Study

Guofa Shou,Ling Xia,Feng Liu,Minhua Zhu,Yu Li,Stuart Crozier

DOI: https://doi.org/10.1109/tmag.2009.2037753

IF: 1.848

2009-01-01

IEEE Transactions on Magnetics

Abstract:A new boundary element method (BEM) based method is described for the design of coils for magnetic resonance imaging (MRI) systems. BEM is an effective approach for solving the electromagnetic forward problem and has been used in the design of MRI gradient coils. However, BEM-based gradient coil design faces an ill-posed mathematical problem, which is conventionally handled by means of a Lagrange multiplication method. This work attempts to improve the BEM method for MRI coil designs by applying the Tikhonov regularization scheme to solve the ill-posed matrix system formulated by the BEM forward model. The objective of the study is not to design some specific gradient or radio-frequency (RF) coils for MRI system, but to discuss the design scheme with practical regularization and constraints. The proposed approach was explained in the design of MRI coils including biplanar transverse gradient coils and RF phased array coils. With the consideration of the practical engineering requirements, physical constraints such as wire intervals are transformed into mathematical constraints and formulated into BEM equations. The examples demonstrate that the proposed method is efficient and flexible for the design of MRI coils with arbitrary geometries and engineering constraints.
Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

Wenlong Xu,Feng Liu,Ling Xia,Stuart Crozier

DOI: https://doi.org/10.2529/piers090831185731

2010-01-01

PIERS Online

Abstract:A comprehensive consideration of loading effects is essential to the design/analysis of high-frequency MRI radio frequency (RF) coils. In this study, a hybrid finite difference time domain (FDTD)-method of moments (MoM) simulation method is implemented for the accurate evaluation of RF coil-tissue interaction. Using this approach, the RF coil is modelled using the MoM algorithm, and the biological load is handled with the FDTD algorithm. Effective communication between these two approaches is realized through a Huygence equivalent surface. The algorithm has been successfully validated and applied to a loaded coil study and the simulation demonstrated the potential of the hybrid algorithm for high frequency RF coil designs.
A Finite-Difference Method for the Design of Biplanar Transverse Gradient Coil in MRI

Minhua Zhu,Guofa Shou,Ling Xia,Xia Li,Feng Liu,Stuart Crozier

DOI: https://doi.org/10.1109/icbbe.2010.5514706

2010-01-01

Abstract:This paper presents a finite difference method for the design of gradient coil in MRI. In this method, a linear matrix equation is formulated using a finite-difference approximation of the current density in the source domain and an optimization procedure is then carried out to solve the resulting inverse problem and the coil winding pattern are found. The developed algorithm is tested with a transverse biplanar gradient coil design example. Compared with conventional design methods such as target-field, standard stream function or boundary element schemes, the new design approach is relatively easy to implement and flexible to manage the local winding pattern for 2D or 3D geometries.
Regularized Least Squares Estimating Sensitivity for Self-calibrating Parallel Imaging

Xiaofang Liu,Xiuzi Ye,Sanyuan Zhang,Feng Liu

DOI: https://doi.org/10.4304/jcp.6.5.857-864

2011-01-01

Journal of Computers

Abstract:Calibration of the spatial sensitivity functions of coil arrays is a crucial element in parallel magnetic resonance imaging (pMRI). The self-calibrating technique for sensitivity extraction has complemented the common calibration technique that uses a separate pre-scan. In order to improve the accuracy of sensitivity estimate from small number of self-calibrating data, which is extracted from a fully sampled central region of a variable-density k-space acquisition in self-calibrating parallel images, a novel scheme for estimating the sensitivity profiles is proposed in the paper. On consideration of truncation error and measurement errors in self-calibrating data, the issue of calculating sensitivity would be formulated as a regularized least squares estimation problem, which is solved by the preconditioned conjugate gradients algorithm. When applying the estimated coil sensitivity to reconstruct full field-of-view(FOV) image from the under-sampling simulated and in vivo data, the normalized signal-to-noise ratio (NSNR) of reconstruction image is evidently improved, and meanwhile the normalized mean squared error (NMSE) is remarkably reduced, especially when a rather large accelerate factor is used.
A MOM/FEM-based coil sensitivity mapping method for high-field parallel MRI

Jin Jin,Feng Liu,Yu Li,Ewald Weber,Wenlong Xu,Stuart Crozier

DOI: https://doi.org/10.1109/IEMBS.2011.6090784

Abstract:In this study, an electromagnetics-based inverse sensitivity mapping method is introduced for applications in high field MRI. Instead of using simplistic numerical approximations, the sensitivity of the radio-frequency coil was determined through a field approach by using iterative optimization. The current study is an extension to previous studies on the inverse method, which has restricted itself to low-field applications due to the use of the Biot-Savart integration to account for the H field calculations. In the current study, full-wave solutions to the Maxwell's equations based MOM/FEM hybrid algorithm were employed to provide H field evaluation. It is demonstrated that the proposed method is able to produce high-fidelity sensitivity estimation which result in images with significantly less artefact power.
Quantitative Comparison Study on the SNR Method of Phased-array Coil in 3.0 T MRI

Longchen Wang,Wei Jin,Yiming Li,Bin Li

DOI: https://doi.org/10.3969/j.issn.1671-7104.2013.01.003

2013-01-01

Abstract:In this paper, ACR single image method and NEMA dual-image method were measured SNR using two types of phased-array coils. The correlation equation of the two methods was obtained and substitutability of two methods was analyzed. The results showed that the two methods are replaceable in the evaluation of coils, but the later method gets higher SNR than the first method because structure noise is eliminated..
Comparison of Two Coils for MR Angiography Based on the SDNR Method

Longchen Wang,Bin Li,Yunfeng Xiao,Ruihua Qiao

DOI: https://doi.org/10.3969/j.issn.1671-7104.2011.04.006

2011-01-01

Abstract:In this paper, signal-to-noise ratio (SNR) and signal different-to-noise ratio (SDNR) methods were used to compare image quality using two different radiofrequency coils. The two coil types included an eight-element phased-array coil and a quadrature birdcage head coil with endcap and the comparison studies performed on a uniform cylindrical phantom and volunteer respectively. The results showed phased-array coil have advantages and proved effectiveness of the method in the evaluation and selection of coils.
Improved Sense Imaging Using Accurate Coil Sensitivity Maps Generated by A Global Magnitude-Phase Fitting Method

Ya-Jun Ma,Wentao Liu,Xin Tang,Jia-Hong Gao

DOI: https://doi.org/10.1002/mrm.25375

2015-01-01

Magnetic Resonance in Medicine

Abstract:PurposeTo develop a novel coil sensitivity processing technique that is able to reduce or eliminate aliasing artifacts and noise amplification in image‐domain parallel imaging (i.e., SENSE).MethodsInitial coil sensitivity maps were derived from the center k‐space lines by a common self‐calibration method. Then continuous trigonometric functions were used to fit both magnitude and phase maps of the self‐calibrated coil sensitivity profile globally. Further, the global fitted coil sensitivity maps were adopted for SENSE reconstruction. Numerical simulations, as well as experiments on phantoms and human subjects were performed to evaluate and compare the effectiveness of this global magnitude‐phase fitting approach with traditional local fitting methods.ResultsBoth simulation and experimental results demonstrated that the proposed novel global fitting method was able to obtain accurate coil sensitivity profiles without Gibbs oscillations. The resultant SENSE images were improved substantially in terms of aliasing imaging artifacts.ConclusionA global magnitude‐phase fitting method for better estimation of accurate coil sensitivity maps was developed, and it was successfully used in producing high‐quality parallel images. Magn Reson Med 74:217–224, 2015. © 2014 Wiley Periodicals, Inc.
Shim Coil Set for an Open Biplanar Mri System Using an Inverse Boundary Element Method

Yang Hu,Xinning Hu,Luguang Yan,Youtong Fang,Wenbo Chen

DOI: https://doi.org/10.1109/tasc.2016.2604220

IF: 1.9489

2016-01-01

IEEE Transactions on Applied Superconductivity

Abstract:This paper proposes a numerical method with an inverse boundary element method (IBEM) to design a set of shim coils for an open bipanar superconducting magnetic resonance imaging (MRI) system. For the traditional cylindrical MRI system, claustrophobics will suffer the palpitations and anxiety attacks when they are enclosed in a small area during the scanning process. However, such bipanar structure provides an open room temperature bore, thus improving patients' comfort. Based on the IBEM, the shim coil skeleton needs to be divided into some small flat triangular elements. By formulating the magnetization distribution by discrete current density, an objective function is constructed to evaluate the minimum error between axial magnetic field and desired magnetic field. In particular, the selfinduction is added into the objective function which is used to adjust the deviation from the ideal target field. Finally, the well-known stream function method is commonly used to map the current density into wires. The algorithm details have been exemplified through biplanar shim coil design examples in this paper. This method can be used for coils on arbitrary surface shapes.
Sensitivity Study for Improved Magnetic Induction Tomography (mit) Coil System

Ziyi Zhang,Hengdong Lei,Peiguo Liu,Dongming Zhou

2013-01-01

Abstract:The improved magnetic induction tomography (MIT) coil system which consists of the two-arm Archimedean spiral coil (TAASC) as excitation coil and the solenoid as receiver coil has much better performance in coil system sensitivity than the conventional MIT coil system which uses the solenoids as excitation coil and receiver coil. In this paper the theoretical sensitivity property for improved MIT coil system are studied fully. The magnetic fields produced by TAASC and solenoid are derived approximately based on the Biot-Savart law. The relations between the coil system sensitivity and the parameters (amplitude of excitation current, maximum outer radius and number of turns of TAASC, and number of turns and length of solenoid) of coil system are calculated. The results show that the sensitivity for improved MIT coil system is proportional to the number of turns of solenoid and electric current of TAASC, and can be improved with the increase of maximum outer radius of TAASC and radius of solenoid. The sensitivity is decreased as the length of solenoid increasing, and not significantly associated with the number of turns of TAASC.
Design of Superconducting Shim Coils for an Open Bipanar Mri System Using Ibem

Yang Hu,Xin Ning Hu,Lu Guang Yan,You Tong Fang

DOI: https://doi.org/10.1109/asemd.2015.7453635

2015-01-01

Abstract:An efficient design method of shim coils for an open bipanar superconducting magnetic resonance imaging (MRI) system is proposed, using an inverse boundary element method (IBEM). This design method first discretizes the shim coil space into some small flat triangular elements. By formulating the magnetization distribution by discrete current density, an objective function is constructed to evaluate the minimum error between axial magnetic field and desired magnetic field. In particular, the self-induction is added into the objective function which is used to adjust the deviation from the ideal target field. Finally, the well-known stream function method is commonly used to map the current density into wires. The algorithm details have been exemplified through biplanar shim coil design examples in this paper. This method can be used for coils on arbitrary surface shapes.
Electromagnetic Field and Radio Frequency Circuit Co-simu-lation Approach for Strongly Coupled Coil Array in Magnetic Reso-nance Imaging

N. Li,S. Liu,F. Du,Q. Chen,C. Luo,Y. Dou,X. Zhang,Y. Li

DOI: https://doi.org/10.1109/intmag.2018.8508851

2018-01-01

Abstract:The theoretical analysis of co-simulation in the conditions of strongly coupled RF coils is proposed in this paper. The proposed co-simulation method is evaluated through the comparison with the conventional simulation methods in terms of the efficency, electromagnetic field (EM) and specific absorption rate (SAR) of a 2-channel strongly coupled coil array. The results demonstrate the proposed co-simulation method saves approximately 94.5% of total simulation time for strongly coupled coil arrays while the EM field and SAR variation is less than 4%.
Equivalent Magnetic Dipole Method Used to Design Gradient Coil for Unilateral Magnetic Resonance Imaging

Zheng Xu,Xiang Li,Pan Guo,Jia-Min Wu

DOI: https://doi.org/10.1088/1674-1056/27/5/058702

2018-01-01

Chinese Physics B

Abstract:The conventional magnetic resonance imaging (MRI) equipment cannot measure large volume samples nondestructively in the engineering site for its heavy weight and closed structure. In order to realize the mobile MRI, this study focuses on the design of gradient coil of unilateral magnet. The unilateral MRI system is used to image the local area above the magnet. The current density distribution of the gradient coil cannot be used as a series of superconducting nuclear magnetic resonance gradient coils, because the region of interest (ROI) and the wiring area of the unilateral magnet are both cylindrical side arc surfaces. Therefore, the equivalent magnetic dipole method is used to design the gradient coil, and the algorithm is improved for the special case of the wiring area and the ROI, so the X and Y gradient coils are designed. Finally, a flexible printed circuit board (PCB) is used to fabricate the gradient coil, and the magnetic field distribution of the ROI is measured by a Gauss meter, and the measured results match with the simulation results. The gradient linearities of x and y coils are 2.82% and 3.56%, respectively, less than 5% of the commercial gradient coil requirement.
Correlation-based reconstruction using coil sensitivity information and image content similarity

Yu Li,Feng Huang,Wei Lin,Randy Duensing,Charles L. Dumoulin

2011-01-01

Abstract:Introduction: A limitation on parallel imaging acceleration in clinical magnetic resonance imaging (MRI) is the spatial encoding capability of multichannel coil sensitivity [1-3]. We have proposed a framework of "correlation-based reconstruction" in order to overcome this limit by converting high-speed imaging reconstruction to the estimation of correlation functions that may include multiple data correlation mechanisms underlying parallel acquisition [4]. In the work presented here, we used the previously reported framework to investigate whether coil sensitivity information and image content similarity can synergistically benefit correlation-based reconstruction for a static MRI scan. Theory: Figure 1(a) shows the k-space model for correlation-based reconstruction [4]. The least square solution to the linear filters {ui(k), i=1,2,...,N} for reconstruction of an arbitrary channel m in Figure 1 can be resolved from a set of linear equations given by:
The Effect of The Number of Sensor Coils on Sensitivity in Electromagnetic Tomography.

Siqi Xu,Qian Zhao,Liu Li,Nan Li,Wenjun Tan

DOI: https://doi.org/10.1145/3451421.3451470

2020-01-01

Abstract:Electromagnetic tomography (EMT) is a process tomography based on the principle of electromagnetic induction. It has the advantages of non-intrusive, non-contact and low harm. In the process of image reconstruction, the sensitivity matrix reflects the influence of tiny disturbance on the measured value, which is an important index of image quality. Base on the traditional "O" sensor array structure in this article, Comsol Multiphysics finite element simulation software is used to divide the measured field into several tiny elements. A simulated perturbation method is used to investigate the effect of the number of EMT sensors' midline coils on sensitivity. The sensitivity matrix of sensor arrays with 4 coils ,8 coils ,12 coils ,16 coils and 20 coils is compared by using the method of separation variables. The sensitivity matrix of different coils is imaged by Matlab software. Through comparative analysis, it is concluded that the sensitivity band shape of the coil in the same position is same in different models. All of them are distributed along the arc type between the excitation and detection coils, which presents the middle strong and gradually weakens to the outside. With the increase of the number of coils, the sensitivity band is widened, but the sensitivity value of the central part is slightly weakened. According to this characteristic, it lays a foundation for the practical application of EMT technology and image reconstruction.
A New Approach to Research Graphical Performance of MRI RF Coil Based on the Quantitative Comparison Method

Gaojie Zhu,Bin Li,Xiaoer Wei

DOI: https://doi.org/10.3969/j.issn.1671-7104.2010.03.007

2010-01-01

Abstract:OBJECTIVE:To compare the performance of three different types of RF coil in 3.0T MRI, the signal-to-noise ratio (SNR) and image uniformity in 3.0 Tesla magnetic resonance imaging system have been studied.MATERIALS AND METHODS:In addition to the measurement of SNR and Uniformity based on the protocol recommend by AAPM, the images had also been analyzed using SPSS and MATLAB to get the SNR distribution along two vertical direction and the whole imaging plane.RESULTS:The SNR with T/R birdcage coil and 8-ch surface coil is seven and twelve times higher than surface coil in the region of interest (ROI), which was set in the center of the phantom images. With regard to the spatial variation of sensitivity, the uniformity of T/R birdcage coil and 8-ch surface coil are also much higher than that of surface coil.CONCLUSION:The images from T/R birdcage and phased array coils are all better than those of surface coil. The SNR of the images from phased array coil is highest while the uniformity of the images from T/R birdcage coil is highest.
Numerical Computation Methods for Evaluating the Electromagnetic Safety of Magnetic Resonance Imaging System

Chaoqun NIU,Qiuliang WANG,Yi LI,Wenju TANG,Yang HU,Xuchen ZHU

DOI: https://doi.org/10.13336/j.1003-6520.hve.20170731002

2017-01-01

Abstract:In recent years,with the development of magnetic resonance imaging (MRI) technology,increasingly attention has been paid to electromagnetic safety of MRI.To summarize the researches in recent years,we introduce the biological effects and safety standards of three different kinds of electromagnetic fields (static magnetic field,gradient field,and radio frequency field) produced by MRI equipment firstly.On the basis of this,the numerical computing methods used for evaluating the electromagnetic safety of MRI are emphatically introduced,in which the human numerical model and numerical algorithm are studied in detail and evaluated for both accuracy and efficiency.The results of research show that when the electromagnetic fields generated by MRI exceed a certain limit,they will create significant biological effects,leading to the discomfort reaction of body.The current body voxel model has high resolution and can reflect the real human body to some extent.However,the general model limits the full advantages of high field MRI equipment,and developing a specific voxel model is an inevitable trend.The existing numerical algorithms used to evaluate the MRI electromagnetic safety include finite element method,moment method,and time domain finite difference method,as well as quasi-static approximation methods and mixed numerical calculation methods.These methods can accurately predict the electromagnetic field value in human tissue up to a point,but can not take into account accuracy and efficiency simultaneously,still need to further improved.The existing safety standards are not yet complete and should add relevant safety standards about open MRI,PET/MRI,LINAC/MRI and other new MRI system.The results can provide references for MRI designers,help to complement the existing MRI safety standards,then to simultaneously improve system performance and ensure electromagnetic safety.

Comparative Analysis of Calculation Methods of Coil Sensitivity in Parallel MRI

Self-calibrating Coil Sensitivity Profiles for Parallel Imaging Based on Anisotropic Diffusion.

A Feasibility Study of Geometric-Decomposition Coil Compression in MRI Radial Acquisitions.

On evaluation of MRI coil excited radio-frequency fields inside multilayered spherical head phantom——DyadicGreen's function/MoM method

MRI Coil Design Using Boundary-Element Method with Regularization Technique: A Numerical Calculation Study

Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

A Finite-Difference Method for the Design of Biplanar Transverse Gradient Coil in MRI

Regularized Least Squares Estimating Sensitivity for Self-calibrating Parallel Imaging

A MOM/FEM-based coil sensitivity mapping method for high-field parallel MRI

Quantitative Comparison Study on the SNR Method of Phased-array Coil in 3.0 T MRI

Comparison of Two Coils for MR Angiography Based on the SDNR Method

Improved Sense Imaging Using Accurate Coil Sensitivity Maps Generated by A Global Magnitude-Phase Fitting Method

Shim Coil Set for an Open Biplanar Mri System Using an Inverse Boundary Element Method

Sensitivity Study for Improved Magnetic Induction Tomography (mit) Coil System

Design of Superconducting Shim Coils for an Open Bipanar Mri System Using Ibem

Electromagnetic Field and Radio Frequency Circuit Co-simu-lation Approach for Strongly Coupled Coil Array in Magnetic Reso-nance Imaging

Equivalent Magnetic Dipole Method Used to Design Gradient Coil for Unilateral Magnetic Resonance Imaging

Correlation-based reconstruction using coil sensitivity information and image content similarity

The Effect of The Number of Sensor Coils on Sensitivity in Electromagnetic Tomography.

A New Approach to Research Graphical Performance of MRI RF Coil Based on the Quantitative Comparison Method

Numerical Computation Methods for Evaluating the Electromagnetic Safety of Magnetic Resonance Imaging System