The field distribution inside a tem cell with a cross of unequal arms as inner conductor

Weigan Lin

DOI: https://doi.org/10.1002/mop.4650040611

IF: 1.311

1991-01-01

Microwave and Optical Technology Letters

Abstract:The field distribution of a new type of TEM cell with a cross of unequal-length arms as the inner conductor is given here. The whole field of such a cell consists of a high-field region and a uniform field region, useful in many applications.

What problem does this paper attempt to address?

Theory of a new type of TEM cell of variable characteristics

Weigan Lin

DOI: https://doi.org/10.1002/mop.4650040811

IF: 1.311

1991-01-01

Microwave and Optical Technology Letters

Abstract:The special cases of a general coaxial rectangular line with square outer conductor and inner cross conductor of equal arms are solved analytically by means of conformal transformations.
Simulation Study of Ferricyanide/Ferrocyanide Concentric Annulus Thermocell with Different Electrode Spacing and Cell Direction

Gao Qian,Yiji Lu,Yuqi Huang,Zhi Li,Xiaoli Yu,Anthony Paul Roskilly

DOI: https://doi.org/10.1016/j.egypro.2017.12.059

2017-01-01

Energy Procedia

Abstract:Thermogalvanic cell also named as thermocell is a new type of technology converting low-grade thermal energy to electricity. In this study, we establish an one-dimensional model of a Fe(CN)63-/4- concentric annulus thermocell and evaluate the influence of electrode spacing and cell direction on the cell performance. Results indicate the ratio of electrolyte thermal resistance to total thermal resistance plays a crucial role in cell performance while electric resistance has relatively less influence. The power of thermocell rises significantly as the electrode spacing increases, from about 0.75mW in both directions to 1.75 mW in horizontal direction and 2.75 mW in vertical direction. Convection of electrolyte is unfavorable to cell performance and the critical electrode spacing where convection begins to affect heat transfer is predicted to be the optimized spacing. At all values of electrode spacing in this study, thermocell in vertical direction performs better than that of horizontal direction.
A New Type Tem Cell with A Sliding Cross As Inner Conductor

WG LIN

DOI: https://doi.org/10.1002/mop.4650060416

IF: 1.311

1993-01-01

Microwave and Optical Technology Letters

Abstract:Riblet's rectangular line with off-center strip inner conductor is changed into one with a vertically sliding symmetrical cross as an inner conductor.
A modified high-order FDTD conformal technique for modeling perfectly conducting objects

Jianhua Wang,Wenyan Yin,Qinghuo Liu

DOI: https://doi.org/10.1109/APMC.2008.4958451

2008-01-01

Abstract:In this paper, we have proposed a new high-order conformal method, in which we use two integral loops of Faraday's law to update H-field. We observe that the proposed method has low numerical dispersion error, and it can use large space cells so as to reduce the computer memory required. Using this modified method, numerical computations are performed to predict the RCS of a PEC object as well as the shielding effectiveness of a metallic enclosure, with good agreements achieved but with less computer memory required.
Electromagnetic Field of a Horizontal Infinitely Long Wire over the Dielectric-Coated Earth

Yong Jian Zhi,Kai Li,You Tong Fang

DOI: https://doi.org/10.1109/tap.2011.2167917

IF: 5.7

2012-01-01

IEEE Transactions on Antennas and Propagation

Abstract:The simple analytical formula for the electromagnetic field radiated by a horizontal infinitely long wire over the planar surface of the earth coated with a dielectric layer is derived. It is concluded that the total field includes four modes: the direct wave, the ideal reflected wave or image wave, the lateral wave, and the trapped surface wave. In particular, both the trapped surface wave and the lateral wave are examined in detail. From analysis and computations, it is demonstrated the trapped surface wave, which is determined by the sum of residues of the poles, can be excited efficiently. When both the infinitely long wire and the observation point are on or near the planar surface, the trapped surface wave is dominant.
Unusual Domain Evolution in Semiconducting Ferroelectrics: A Phase Field Study

Jie Wang,Zheng Chen,Takahiro Shimada,Takayuki Kitamura

DOI: https://doi.org/10.1016/j.physleta.2013.04.044

IF: 2.707

2013-01-01

Physics Letters A

Abstract:The effect of electrical conductivity on the domain evolution of semiconducting ferroelectrics is investigated using a phase field model which includes the drift of space charges. Phase field simulations show that the tail-to-tail 90° charged domain wall appears during the domain formation in the semiconducting ferroelectrics at zero field, which is prohibited in common insulating ferroelectrics. Due to the screening of polarization charges, the domain switching takes place through the motion of head-to-head 180° charged domain wall in the semiconducting single-domain ferroelectrics subjected to an electric field. Comparing to the insulating ferroelectrics, the semiconducting ferroelectrics have a lower speed of domain evolution due to the decrease of mobility of charged domain walls. The response of semiconducting ferroelectrics to a mechanical load is also found different from that of insulating ferroelectrics.
Circular Coaxial Line with A Cross of Unequal Arms As Inner Conductor

WG LIN

DOI: https://doi.org/10.1002/mop.4650040712

IF: 1.311

1991-01-01

Microwave and Optical Technology Letters

Abstract:Presented here is a circular coaxial line with a cross of unequal arms as the inner conductor to enable us to have two parameters at our disposal to adjust the line characteristics more freely.
Electric Field Distribution of Composite Insulator on AC 1000 kV Double Circuit Transmission Line on the Same Tower

Tian-xi XIE,Peng LIU,Jing LI,Jian-wei CHENG,Zong-ren PENG

DOI: https://doi.org/10.13336/j.1003-6520.hve.2010.01.006

2010-01-01

Abstract:Different with single circuit transmission line,three-phase conductors of each circuit on 1000 kV double circuit transmission line on the same tower are hung vertically with small phase spacing and shielded by cross arm imperfectly,resulting in great mutual influence among three phases and the electric field distribution characteristic of insulator strings different with single transmission line.The three-dimension finite element method was used to simulate and calculate the electric field distribution characteristic of composite insulators and the grading rings on AC 1000 kV single and double circuit transmission line tangent tower.The results show when there are hanging the same composite insulator,conductor and hardware fittings,the electric field distribution of composite insulators and the grading rings on double circuit transmission line is more seriously distorted than the single line.For double circult line.the maximum electric field intensity of composite insulator is about 22.6%and grading ring 15.4%higher than single circuit line.Thus,the mutual influence among three phases must be fully considered in design and test of double circuit transmission line on the same tower.
Heat transfer characteristics of conductive material under inner non-uniform electromagnetic fields

Huijuan Bai,Xiaojing Zheng

DOI: https://doi.org/10.1016/S0894-9166(11)60013-X

2011-01-01

Acta Mechanica Solida Sinica

Abstract:Electronic transport properties can be influenced by the applied electromagnetic fields in conductive materials. The change of the electron distribution function evoked by outfields obeys the Boltzmann equation. In this paper, a general law of heat conduction considering the non-uniform electromagnetic effect is developed from the Boltzmann equation. An analysis of the equation leads to the result that the electric field gradient and the magnetic gradient in the conductive material are responsible for the influences of electromagnetic fields on the heat conduction process. A physical model is established and finite element numerical simulation reveals that heat conduction can be increased or delayed by the different directions of the electric field gradient, and the existence of the magnetic gradient always hinders heat conduction.
Dc Electric Field Distribution in Planar Dielectric in the Presence of Space Charge

Z. Xu,W. Choo,G. Chen

DOI: https://doi.org/10.1109/icsd.2007.4290864

2007-01-01

Abstract:Electric field in a dielectric material under dc conditions is determined by conductivity of the material. It is well known that the dc conductivity is a function of both temperature and electric field. This is generally not serious issue for a thinner planar sample as the temperature gradient is not great and the applied field is uniform across the sample. However, in the presence of space charge, electric field will be modified. As a result, the conductivity varies with the position, leading to change in electric field distribution. In this paper, we present a numerical simulation of electric field considering the effect of space charge. Space charge distributions were obtained from low density polyethylene (LDPE) and crosslinked polyethylene (XLPE) subjected to high dc voltage. Homocharge was formed in LDPE while heterocharge in XLPE. Electric field obtained from simulation has been compared with that without considering conductivity effect. It has been found that electric field retains its general shape. However, the maximum field has been significantly modified.
A New Type of Coaxial Line of Rectangular and Oval Cylinders with Constant Electric Intensity on the Latter Cylinder

WG LIN

DOI: https://doi.org/10.1002/mop.4650050107

IF: 1.311

1992-01-01

Microwave and Optical Technology Letters

Abstract:Denoting g(x + iy) = 1/alpha-beta sn2(x + iy, k(o)) - A/sn2(x + iy, k(o)) - A/beta' A = 1 + alpha/1 - alpha/beta' and k(o)2 = (1 - alpha/beta)/(1 + alpha)2 we find an equipotential of constant electric intensity to form a new type of TEM transmission line for industrial applications.
Electric Field and Electromagnetic Environment Analyses of a 500 Kv Composite Cross Arm

Gao Yanfeng,Wu Chao,Liang Xidong,Liu Yingyan,Wang Guoli,Gao Chao

DOI: https://doi.org/10.1109/ceidp.2015.7352045

2015-01-01

Abstract:In order to further utilize the transmission line cooridor, meanwhile, achieve a relatively friendly electromagnetic environment, composite cross arm is developed and employed in the transmission system. The electric field distribution as well as the electromagentic environment of composite cross arm deserves a detailed and in-depth study to verify its performance. In this research, the three-dimension (3D) finite element method (FEM) was employed to calculate the electric field distribution of composite cross arm. The electromagnetic environment was characterized by electric field intensity on the ground, radio interference and audible noise and these parameters were investigated and analysed. Calculation results indicated that by using proper metal hardware, composite cross arm could obtain a relatively suitable distribution of electric field and potential. The electromagnetic environment calculation results demonstrated that composite cross arm could meet the standard design requirement. Furthermore, some suggestions were made based on this research to achieve an optimization use of composite cross arm.
The T-A formulation: an efficient approach to model the macroscopic electromagnetic behaviour of HTS coated conductor applications

Felix Huber,Wenjuan Song,Min Zhang,Francesco Grilli

DOI: https://doi.org/10.1088/1361-6668/ac5163

2022-03-01

Superconductor Science and Technology

Abstract:Abstract In recent years, the T-A formulation has emerged as an efficient approach for modelling the electromagnetic behaviour of high-temperature superconductor (HTS) tapes in the form of coated conductors (CCs). HTS CCs are characterized by an extremely large width-to-thickness ratio of the superconducting layer, normally up to 1000 ∼ 6000, which in general leads to a very large number of degrees of freedom. The T-A formulation considers the superconducting layer to be infinitely thin. The magnetic vector potential A is used to calculate the magnetic field distribution in all simulated domains. The current vector potential T is used to calculate the current density in the superconducting layer, which is a material simulated with a highly nonlinear power-law resistivity. This article presents a review of the T-A formulation. First, the governing equations are described in detail for different cases (2D and 3D, cartesian and cylindrical coordinates). Then, the literature on the implementation of T-A formulation for simulating applications ranging from simple tape assemblies to high field magnets is reviewed. Advantages and disadvantages of this approach are also discussed.

physics, condensed matter, applied
Local Fields in Conductor Surface Electromigration: A First-Principles Study in the Low-Bias Ballistic Limit

Kirk H. Bevan,Wenguang Zhu,G. Malcolm Stocks,Hong Guo,Zhenyu Zhang

DOI: https://doi.org/10.1103/physrevb.85.235421

IF: 3.7

2012-01-01

Physical Review B

Abstract:Utilizing first-principles quantum transport calculations, we investigate the role of local fields in conductor surface electromigration. A nanometer-thick Ag(100) thin film is adopted as our prototypical conductor, where we demonstrate the existence of intense local electric fields at atomic surface defects under an external bias. It is shown that such local fields can play an important role in driving surface electromigration and electrical breakdown. The intense fields originate from the relatively short (atomic-scale) screening lengths common to most elemental metals. This general short-range screening trend is established self-consistently within an intuitive picture of linear response electrostatics. The findings shed new light on the underlying physical origins of surface electromigration and point to the possibility of harnessing local fields to engineer electromigration at the nanoscale.
Distribution of Electromagnetic Field in Cold Crucible for Electromagnetic Confinement

Ruirun Chen,Hongsheng Ding,Weisheng Bi,Jingjie Guo,Lin Liu,Hengzhi Fu

DOI: https://doi.org/10.3321/j.issn:1001-2249.2006.10.003

2006-01-01

Abstract:Distribution of magnetic strength is measured by the small induction coil method. The results show that the magnetic strength is higher inside the coil, and then is attenuated toward both ends. Axial magnetic intensity increases with the increases of the power, and decreases with the decrease of the radial, slightly decreasing from the slit to the middle of the segment. Radial magnetic intensity is sharply decreased with increasing in radius and coils. Axial magnetic intensity is higher than radial magnetic intensity, and is more important for electromagnetic confinement.
Analysis of Higher-Order Mode Effects in the Resistively Loaded Monocone TEM Cell

Yijie Gu,Da Li,Hanzhi Ma,Yan Li,Ling Zhang,Ruifeng Li,Ning Jin,Ran Hao,Er-Ping Li

DOI: https://doi.org/10.1109/temc.2022.3187834

IF: 2.036

2022-01-01

IEEE Transactions on Electromagnetic Compatibility

Abstract:This article proposes a method to obtain the analytic solution of electromagnetic field inside the practical finite monocone transverse electromagnetic (TEM) cell. The higher-order modes existing in a practical monocone TEM cell are solved and analyzed for the first time, which explains the field distortion corresponding to the ideal standard field. The proportionality factors of these modes are determined by comparison with simulation results. The calculation results (i.e., sum of modes) are consistent with simulation and experimentally validated. This work can be used for monocone design of eliminating higher-order modes and expanding the time window, and mode analysis for other kinds of TEM cells.
Thermal-Field Electron Emission from Three-Dimensional Topological Semimetals

Wei Jie Chan,Yee Sin Ang,L. K. Ang

DOI: https://doi.org/10.48550/arXiv.2105.09874

2021-05-21

Abstract:A model is constructed to describe the thermal-field emission of electrons from a three-dimensional ($3$D) topological semimetal hosting Dirac/Weyl node(s). The traditional thermal-field electron emission model is generalised to accommodate the $3$D non-parabolic energy band structures in the topological Dirac/Weyl semimetals, such as cadmium arsenide (\ch{Cd3As2}), sodium bismuthide (\ch{Na3Bi}), tantalum arsenide (\ch{TaAs}) and tantalum phosphide (\ch{TaP}). Due to the unique Dirac cone band structure, an unusual dual-peak feature is observed in the total energy distribution (TED) spectrum. This non-trivial dual-peak feature, absent from traditional materials, plays a critical role in manipulating the TED spectrum and the magnitude of the emission current. At zero temperature limit, a new scaling law for pure field emission is derived and it is different from the well-known Fowler-Nordheim (FN) law. This model expands the recent understandings of electron emission studied for the Dirac $2$D materials into the $3$D regime, and thus offers a theoretical foundation for the exploration in using topological semimetals as novel electrodes.

Mesoscale and Nanoscale Physics,Materials Science,Applied Physics
The Spatial Distribution of Electric Field as a Unifying Idea in Transmission Line Design

Robert G. Olsen,Chijie Zhuang

DOI: https://doi.org/10.1109/tpwrd.2018.2884879

IF: 4.825

2019-06-01

IEEE Transactions on Power Delivery

Abstract:It is shown that the most important electrical design criteria for long (i.e., stability limited) high voltage overhead transmission lines operating at a given voltage are all related to the spatial electric field distribution between phase conductors. Hence, when designing a long transmission line, a change in one design parameter necessarily causes changes in the others. It is shown how an understanding of these relationships can lead to insight into the design and to the tradeoffs that must be made in designing these transmission lines. More specifically, a more spatially uniform electric field implies an increased power capacity for long transmission lines but also reduces the critical flashover voltage and increases the capacitance per unit length.

engineering, electrical & electronic
Analytic Solutions for the Ac Resistance and Internal Inductance of a Superconductive Circular Two‐wire Transmission Line

BZ WANG

DOI: https://doi.org/10.1002/mop.4650080109

IF: 1.311

1995-01-01

Microwave and Optical Technology Letters

Abstract:In this article, under the quasi-TEM assumption, using the two-fluid model and the London equations, and through an exact electromagnetic field analysis, we get an analytic solution for the current density inside the superconductors of a superconductive circular two-wire transmission line. Finally, the analytic solutions for its ac resistance and internal inductance are obtained. (C) 1995 John Wiley & Sons, Inc.
Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings

LI Yao-qin,HUO Feng,NAN Jing

DOI: https://doi.org/10.1109/ispec48194.2019.8975212

2019-11-01

Abstract:Composite cross-arm of ultra-high voltage (UHV) tower bears both electric and mechanical loads. Owing to its high operation voltage and very complex insulation structure, potential and electric field distributions of composite cross-arm are extremely uneven. It may affect long-term stable operation of transmission line. Using three dimension finite element method (FEM), this paper presented research on voltage equalizing characteristics of composite cross-arms in 1000 kV tower. Computation model was established. The potential and electric field distributions of middle phase and side phase under several design schemes were computed. The program for grading and shielding devices was designed and then optimized. The electric field computation results showed that the electric field strengths on key positions were within permitted range. Corona tests showed that no visible corona discharge was found from insulators or fittings when the applied voltage was 1.2 times of test voltage. The design of the grading and shielding devices can be applied in actual projects.

The field distribution inside a tem cell with a cross of unequal arms as inner conductor

Theory of a new type of TEM cell of variable characteristics

Simulation Study of Ferricyanide/Ferrocyanide Concentric Annulus Thermocell with Different Electrode Spacing and Cell Direction

A New Type Tem Cell with A Sliding Cross As Inner Conductor

A modified high-order FDTD conformal technique for modeling perfectly conducting objects

Electromagnetic Field of a Horizontal Infinitely Long Wire over the Dielectric-Coated Earth

Unusual Domain Evolution in Semiconducting Ferroelectrics: A Phase Field Study

Circular Coaxial Line with A Cross of Unequal Arms As Inner Conductor

Electric Field Distribution of Composite Insulator on AC 1000 kV Double Circuit Transmission Line on the Same Tower

Heat transfer characteristics of conductive material under inner non-uniform electromagnetic fields

Dc Electric Field Distribution in Planar Dielectric in the Presence of Space Charge

A New Type of Coaxial Line of Rectangular and Oval Cylinders with Constant Electric Intensity on the Latter Cylinder

Electric Field and Electromagnetic Environment Analyses of a 500 Kv Composite Cross Arm

The T-A formulation: an efficient approach to model the macroscopic electromagnetic behaviour of HTS coated conductor applications

Local Fields in Conductor Surface Electromigration: A First-Principles Study in the Low-Bias Ballistic Limit

Distribution of Electromagnetic Field in Cold Crucible for Electromagnetic Confinement

Analysis of Higher-Order Mode Effects in the Resistively Loaded Monocone TEM Cell

Thermal-Field Electron Emission from Three-Dimensional Topological Semimetals

The Spatial Distribution of Electric Field as a Unifying Idea in Transmission Line Design

Analytic Solutions for the Ac Resistance and Internal Inductance of a Superconductive Circular Two‐wire Transmission Line

Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings