Abstract:In transient electromagnetic (TEM) methods, the recorded data for both the magnetic field and its time derivative are influenced by the waveforms of the transmitting current. These waveforms are characterized by parameters such as the durations of the turn-on, steady, and turn-off stages, as well as the base frequency, duty cycle, and waveform repetition. The full-waveform effects encompass all counteracting effects observed in TEM responses that arise from using a waveform other than a step-off or step-on waveform. To address these complexities, a 3D forward-modeling solver was developed for TEM methods, capable of calculating TEM responses while considering realistic waveforms with considerations for base frequency, duty cycle, and waveform repetition. The effects of these parameters on the magnetic field and its time derivative were investigated through numerical experiments using models involving deep-buried horizontal and vertical conductors. The results indicated that as the waveform period increases, there is a significant improvement in the detection and discrimination capability of the magnetic field for perfect conductors with a conductivity of 1000 S/m or higher in the models presented in this study. However, the improvement in the time derivative of the magnetic field is minimal. Interestingly, the improvement in both the magnetic field and its time derivative does not show a consistent trend as the conductor conductivity increases. In addition, a novel equivalence phenomenon was uncovered in both the magnetic field and its time derivative data. The results also suggested that as the number of waveform repetitions increases or the duty cycle decreases, the discrepancies between the recorded TEM responses at the two off-time stages within a single period gradually diminish. However, the influence of the full waveform on the TEM responses becomes more pronounced with an increasing number of waveform repetitions or a decrease in the duty cycle, especially for the magnetic field.

Analysis of Higher-Order Mode Effects in the Resistively Loaded Monocone TEM Cell

Deep Learning Inverse Analysis of Higher Order Modes in Monocone TEM Cell

Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

Optimization design of TEM cell based on multi-stage curved edge transition structure and magnetic loss method

Characteristic Mode Analysis Of Resistor-Loaded Frequency Selective Surfaces: Theoretical Research And Experimental Verification

Analytical Modeling for Probe Impedance Using Reflection and Transmission Theory in Eddy Current Testing

Imaging Simulation of Charged Nanowires in TEM with Large Defocus Distance.

Mode Analysis in a Conceptual Hybrid Simulation Model for Efficient ECRIS Simulations

Analysis of TM and TE Modes in Eccentric Coaxial Lines Based on Bipolar Coordinate System

Calculation of ATEM Cell Characteristic Impedance Based on Static Field Approximation and MoM

Analysis of TEM Horn with Dielectric Loaded

A Fast and Efficient Method for Three-Dimensional Transient Electromagnetic Modeling Considering IP Effect

Analysis of High Electromechanical Coupling Coefficient Zinc Oxide Lame’ Mode Resonators and a Design Technique for Spurious Mode Mitigation

Analysis of Electromagnetic Modes Excited in Overmoded Structure Terahertz Source

Semi-analytical Calculation of Resonant Modes in Axially Asymmetric Microtube Resonators

Effects of base frequency, duty cycle, and waveform repetition on TEM responses: Insights from models of a deep-buried conductor

A Simple Apparent Resistivity Definition for Modified Central-Loop TEM System

Analysis of Dielectric Coated Conducting Bodies Using Characteristic Mode Theory

Scattering of Electromagnetic Waves from a Cone with Conformal Mapping: Application to Scanning Near-Field Optical Microscope

A Novel Permittivity Measurement Method Using Multiple TM mn0 Modes of Cylindrical Cavity

Analytical solution to electromagnetic wave transport in planar magneto-optical waveguide: modal dispersion, coupling, and nonreciprocal flow