Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. In a piping system, pipe bends are more flexible than straight pipes because of their curved geometry, supplemented by higher stress and strain concentration, leading to one of the crucial components in piping industries. Therefore, safe design of pipe bends is essential for smooth running of the piping system, and plastic collapse moment is one of its criteria. This paper utilizes three-dimensional finite element analyses to model empirical solutions for the plastic collapse moment for different angled pipe bends subjected to combined pressure and in-plane closing, in-plane opening, and out-of-plane bending moments. Plastic collapse moments for 30∘ to 180∘ pipe bends are determined for elastic perfectly plastic and strain hardening materials, employing large geometry change option and internal pressure effect. It is observed from results that pressure effect is more prominent in thinner pipe bends of larger bend angle under all bending cases. For in-plane opening and out-of-plane bending moments, collapse moment increases and then decreases with increase in pressure intensity for all sizes of pipe bend. However, for in-plane opening bending moment, collapse moments keep on decreasing for thicker ([math] = 11.33) pipe bends. Finally, the study presents new improved plastic collapse moment solutions for different angled pipe bends under bending moment and internal pressure, derived from the finite element results of elastic perfectly plastic and strain hardening material models.

Plastic Deformation Analysis of Bending Pipe and Application to Modal Analysis

High Precision of Tube Modal Analysis Considering of Tube Bending Effect

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Study on Applicability of Modal Analysis of Thin Finite Length Cylindrical Shells Using Wave Propagation Approach

FINITE ELEMENT ANALYSIS OF PLASTIC LIMIT LOADS OF LOCALLY THINNED ELBOWS UNDER INTERNAL PRESSURE AND IN-PLANE BENDING MOMENT

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

PLASTIC LIMIT LOAD ANALYSIS OF T-JUNCTIONS OF PIPING WITH LOCAL WALL-THINNINGS UNDER OUT-OF-PLANE MOMENT

Influence of Plastic Deformation on Seismic Response of Piping

Study of plastic limit load of the combined fittings of double elbows under in-plane bending moment

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

PLASTIC LIMIT LOAD EQUATIONS OF DEFECT FREE ELBOWS SUBJECTED TO IN-PLANE BENDING MOMENT

Numerical Study on Plastic Strain Distributions and Mechanical Behaviour of a Tube under Bending

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Plastic Collapse Loads for Piping Elbows under In-plane Open/Close Bending Moment

Buckling Analysis of Plastic Pipe Reinforced by Cross-Winding Steel Wire under Bending

A New Approach Of Piping Dynamic Response Considering Plastic Effect

Elasto-plastic behavior of pipe subjected to steady axial load and cyclic bending

Development of new improved plastic collapse moment equations of pressurized different angled pipe bends under bending moments

Inelastic behavior of bi-symmetric beams with steady axial force and cyclic bending loads

Comparison of plastic collapse moment for different angled non-circular pipe bends under bending moments and internal pressure

Numerical study of defect free elbows subjected to in-plane bending moment