Abstract:Multiwalled carbon nanotubes (MWCNTs) were modified via polymerization of styrene under microwave irradiation, and polystyrene (PS)–MWCNT composites with individual-dispersed nanotubes were prepared by melt-mixing using industrial extruder and injection moulding machine. The microscopic morphologies of modified MWCNTs (m-MWCNTs) and composites were studied through transmission electronic microscopy and scanning electron microscopy. Result showed that a PS coat layer was introduced on the m-MWCNT surfaces, improving the compatibility of nanotubes with poor polar materials such as tetrahydrofuran, toluene, and PS matrix. Contrary to the composite prepared directly using purified MWCNTs (PS–p-MWCNT composite) without further modification, the composite prepared using m-MWCNTs (PS–m-MWCNT composite) exhibited a PS middle layer between nanotubes and matrix, leading to a strong interfacial adhesion. Thereby, although the nanotubes are individually dispersed in both PS–p-MWCNT and PS–m-MWCNT composites, the mechanical property of the latter is better than that of the former. When the nanotube content is 0.32wt%, the PS–m-MWCNT composite had a 250% increase of impact strength as compared to pure PS, but the PS–p-MWCNT composite had only a 150% increase. Furthermore, the tensile strength of PS–p-MWCNT composite descended slightly with the addition of nanotube content, whereas, that of the PS–m-MWCNT composite ascended slightly.

Characterization of Conductive Multiwall Carbon Nanotube/polystyrene Composites Prepared by Latex Technology

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

Enhancing dispersion of copper nanowires in melt-mixed polystyrene composites

Latex-Based Polystyrene Nanocomposites with Non-Covalently Modified Carbon Nanotubes

Electrical and optical percolations of polystyrene latex-multiwalled carbon nanotube composites

Study on the Conductivity of Multiwalled Carbon Nanotubes Filled Polycarbonate/Styrene-series Polymer Composites

Facile fabrication of highly conductive polystyrene/nanocarbon composites with robust interconnected network via electrostatic attraction strategy

Preparation of polystyrene–multiwalled carbon nanotube composites with individual-dispersed nanotubes and strong interfacial adhesion

Reinforcement of high performance polystyrene/polyamide/polythiophene with multi-walled carbon nanotube obtained through various routes

Electrical conductivity of carbon nanotube-filled miscible poly(phenylene oxide)/polystyrene blends prepared by melt compounding

Structure and Properties of Multiwall Carbon Nanotubes/Polystyrene Composites Prepared via Coagulation Precipitation Technique

Preparation Of Conductive Polyphenylene Sulfide/Polyamide 6/Multiwalled Carbon Nanotube Composites Using The Slow Migration Rate Of Multiwalled Carbon Nanotubes From Polyphenylene Sulfide To Polyamide 6

Constructing Highly Thermally Conductive Polystyrene-Based Composites by Introducing Multi-Walled Carbon Nanotubes into Melamine Foam-Supported Boron Nitride Network

"Highly Conductive PDMS/Carbon Nanotube/Graphene Nanocomposites and Effect of Sulfuric Acid Treatment on Conductivity"

Preparation and Characterization of A Poly[Ni(Salen)]/Multiwalled Carbon Nanotube Composite by in Situ Electropolymerization As A Capacitive Material

Selective Location and Conductive Network Formation of Multiwalled Carbon Nanotubes in Polycarbonate/poly(vinylidene Fluoride) Blends

Facile and Controllable Assembly of Multiwalled Carbon Nanotubes on Polystyrene Microspheres

The thiol group modified multi-wall carbon nanotubes to enhance the dielectric properties of polystyrene

Electrically conductive nanocomposites of PMMA and carbon nanotubes prepared by in situ polymerization under probe sonication

Rheological, thermal, and mechanical characterizations of polystyrene/single-walled carbon nanotube composites

Mechanical and electrical properties of shape memory polymer matrix and carbon nanocomposite