Abstract:Multiwalled carbon nanotubes (MWCNTs) were modified via polymerization of styrene under microwave irradiation, and polystyrene (PS)–MWCNT composites with individual-dispersed nanotubes were prepared by melt-mixing using industrial extruder and injection moulding machine. The microscopic morphologies of modified MWCNTs (m-MWCNTs) and composites were studied through transmission electronic microscopy and scanning electron microscopy. Result showed that a PS coat layer was introduced on the m-MWCNT surfaces, improving the compatibility of nanotubes with poor polar materials such as tetrahydrofuran, toluene, and PS matrix. Contrary to the composite prepared directly using purified MWCNTs (PS–p-MWCNT composite) without further modification, the composite prepared using m-MWCNTs (PS–m-MWCNT composite) exhibited a PS middle layer between nanotubes and matrix, leading to a strong interfacial adhesion. Thereby, although the nanotubes are individually dispersed in both PS–p-MWCNT and PS–m-MWCNT composites, the mechanical property of the latter is better than that of the former. When the nanotube content is 0.32wt%, the PS–m-MWCNT composite had a 250% increase of impact strength as compared to pure PS, but the PS–p-MWCNT composite had only a 150% increase. Furthermore, the tensile strength of PS–p-MWCNT composite descended slightly with the addition of nanotube content, whereas, that of the PS–m-MWCNT composite ascended slightly.

Structure and Properties of Multiwall Carbon Nanotubes/Polystyrene Composites Prepared via Coagulation Precipitation Technique

Structure and Properties of Polystyrene-encapsulated Multi-walled Carbon Nanotubes Composites Prepared Through Ultrasonically Initiated in Situ Emulsion Polymerization

Ultrasonically prepared polystyrene/multi-walled carbon nanotube nanocomposites

Preparation of polystyrene–multiwalled carbon nanotube composites with individual-dispersed nanotubes and strong interfacial adhesion

Single-walled Carbon Nanotube–polymer Composites: Electrical, Optical and Structural Investigation

Electrical and optical percolations of polystyrene latex-multiwalled carbon nanotube composites

Preparation of Multiwall Carbon Nanotubes/poly(p‐phenylene Benzobisoxazole) Nanocomposites and Analysis of Their Physical Properties

Reinforcement of high performance polystyrene/polyamide/polythiophene with multi-walled carbon nanotube obtained through various routes

Preparation and Properties of Multi-Walled Carbon Nanotube/carbon/polystyrene Composites

Facile and Controllable Assembly of Multiwalled Carbon Nanotubes on Polystyrene Microspheres

Structure and Properties of Polyurethane/Multi-walled Carbon Nanotubes Composites Prepared by Spray Drying Method

Encapsluation Of Co And Pd Multi-Metal Nanowires Inside Multiwalled Carbon Nanotubes By Microwave Plasma Chemical Vapor Deposition

Preparation and Properties of Plasticized Starch/multiwalled Carbon Nanotubes Composites

Effect of Preparation Method of Multi-Walled Carbon Nanotube/poly(methyl Methacrylate) Nanocomposite on Its Characteristics.

Study on the Conductivity of Multiwalled Carbon Nanotubes Filled Polycarbonate/Styrene-series Polymer Composites

Comparative Study of Two Polymer Carbon Nanotube Composites Using Electron Paramagnetic Resonance and Transmission Electron Microscopy

Concise route to styryl-modified multi-walled carbon nanotubes for polystyrene matrix and enhanced mechanical properties and thermal stability of composite

Preparation and properties of polyurethane/multiwalled carbon nanotube nanocomposites by a spray drying process

Synthesis and characterization of carbon nanotube/polypyrrole core–shell nanocomposites via in situ inverse microemulsion

Synthesis and Characterization of Multi-Walled Carbon Nanotube/Polythiophene Composites

Synthesis and characterization of carbon nanotube/polypyrrole core-shell nanocomposites viain situ inverse microemulsion