Abstract:Conductive polymer composites (CPCs) with different types of polytetrafluoroethylene (PTFE) were prepared via melt mixing, and the cellular structure was introduced into poly (butylene succinate) (PBS) by the supercritical CO2 foaming technique. The carbon nanotubes (CNTs) had the best dispersion in the PBS/CNTs/PTFE-P5 composite (PTFE with a diameter of approximately 5-10 mu m). The CNTs enhanced the crystallizability of PBS, and the addition of PTFE was more significant, especially PTFE-P5. The storage modulus increased, and a transition from liquid-like to solid-like behavior occurred at low frequencies. Adding PTFE dramatically improved the pore structure, leading to a two-orders-of-magnitude increase in pore density, especially for PTFE-P5. The conductivity (delta) of solid PBS/CNTs/PTFE-P5 was four times higher than that of PBS/CNTs. The delta values of all the foams were much higher than those of their solid counterparts, demonstrating that the introduction of a large number of pores optimized the dispersion of CNTs and further improved the electrical conductivity because of the formation of a more complete conductive network structure (CNS). In particular, the delta value of foamed PBS/CNTs/PTFE-P5 under 3 wt% CNT loading reached 54.05 S/m. The thermal and mechanical properties, as well as the thermal conductivity, were also investigated. This work provides a simple method to prepare flexible biodegradable CPCs with a highly dispersed CNT CNS under high melt viscosity conditions.

Electrical conductivity of carbon nanotube-filled miscible poly(phenylene oxide)/polystyrene blends prepared by melt compounding

Poly(lactic acid)/carbon nanotube composites with enhanced electrical conductivity via a two-step dispersion strategy

Highly Electrically Conductive Polymer Composite with a Novel Fiber-Based Segregated Structure

High‐Conductivity Polymer Nanocomposites Obtained by Tailoring the Characteristics of Carbon Nanotube Fillers

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

Increasing the electrical conductivity of carbon nanotube/polymer composites by using weak nanotube–polymer interactions

Low Percolation Threshold and Enhanced Electromagnetic Interference Shielding in Polyoxymethylene/Carbon Nanotube Nanocomposites with Conductive Segregated Networks

Facile Preparation of Electromagnetic Interference Shielding Materials Enabled by Constructing Interconnected Network of Multi-walled Carbon Nanotubes in a Miscible Polymeric Blend

The Electrical Resistivity and Percolation Threshold of MWCNTs/polymer Composites Filled with a Few Aligned Carbonyl Iron Particles

Isotactic Polypropylene/carbon Nanotube Composites Prepared by Latex Technology: Electrical Conductivity Study

Partially miscible poly(lactic acid)-blend-poly(propylene carbonate) filled with carbon black as conductive polymer composite

Effects of Carbon Nanotube Coated with Polypyrrole on Polyvinyl Chloride Composites' Conductivity

Facile Preparation of Poly(butylene Succinate)/carbon Nanotubes/polytetrafluoroethylene Ternary Nanocomposite Foams with Superior Electrical Conductivity by Synergistic Effect of “ball Milling” and Supercritical Fluid-Assisted Processing

Preparation and electrically conductive behavior of multiphase composites of carbon nanotube/polyethylene/polystyrene

A Conductive Carbon Nanotube-Polymer Composite Based on A Co-Continuous Blend

Polyoxymethylene/Carbon Nanotube Self-Assembly Networks with Improved Electrical Conductivity for Engineering Functional Structural Materials

Fabrication and Electrical Properties of Cnt/Pp Conductive Composites with Low Percolation Threshold by Solid State Alloying

Electrical Properties of Percolative Polystyrene/carbon Nanofiber Composites

Electrically Conductive Polypropylene Nanocomposites with Negative Permittivity at Low Carbon Nanotube Loading Levels.

A facile melt coating approach to fabricate macroscopic segregated polymer/carbon nanotube conductive composites with balanced properties

Enhancing the Electrical Conductivity of Carbon Black-Filled Immiscible Polymer Blends by Tuning the Morphology