Abstract:Graphene nanoplate (GNP) is a two-dimensional plate-like carbon material with high aspect ratio and excellent electrical conductivity. It is one of the most commonly used fillers for conductive polymer composites (CPCs), which have potential applications in flexible electrodes and sensors. The electrical properties of the CPCs particularly depend on the microstructure of GNP networks. The electrical conductivity of the CPCs leaps in several magnitude levels when the graphene concentration reaches a critical value, which is defined as the percolation threshold. For ordinary isotropic CPCs, the percolation threshold is relatively high, which leads to inferior performance with poor mechanical and electrical properties. Aligning the graphene plates is an effective method to reduce the percolation threshold of the CPCs. Carbonyl iron particles (CIPs) are easily aligned to form chain-like structures when a magnetic field is applied. In this work, CIPs and GNPs are mixed with polydimethylsiloxane (PDMS), and the hybrid is cured under a magnetic field of 0.5 T. The alignment of CIPs induces the GNPs in the PDMS to orientate in a certain direction under the applied magnetic field generating anisotropic structures. Both isotropic and anisotropic structured GNPs/PDMS composites are prepared with various GNP concentrations. The microstructure and electrical conductivity of the GNPs/PDMS composites are investigated by experimental methods. It is found that anisotropic graphene networks are formed and the percolation threshold of the anisotropic composites is 0.15 vol%, compared to that of the isotropic composites which is 0.85 vol%. The alignment of GNPs significantly reduces the percolation threshold. Furthermore, a plate lattice model is proposed to reveal the effect of the alignment of GNPs on the formation of conductive networks. With the increase of the alignment degree of GNPs, the percolation threshold decreases significantly, which is consistent with the experimental results.

"Highly Conductive PDMS/Carbon Nanotube/Graphene Nanocomposites and Effect of Sulfuric Acid Treatment on Conductivity"

Production of elastomer-based highly conductive hybrid nanocomposites and treatment with sulfuric acid

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

Effect of the Surface Functionalization of Graphene and MWCNT on the Thermodynamic, Mechanical and Electrical Properties of the Graphene/MWCNT-PVDF Nanocomposites

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Fabrication and Electrical Properties Analysis of Swcnts/Pdms Composites

Mechanical and electrical properties of shape memory polymer matrix and carbon nanocomposite

Epoxy Resin Nanosuspensions and Reinforced Nanocomposites from Polyaniline Stabilized Multi-Walled Carbon Nanotubes

Flexible Electrospun Polyvinylidene Fluoride Nanofibrous Composites with High Electrical Conductivity and Good Mechanical Properties by Employing Ultrasonication Induced Dispersion of Multi-Walled Carbon Nanotubes

Investigation of the Crack Propagation Behavior of the Multiwalled Carbon Nanotube/Graphite/Natural Rubber Hybrid Nanocomposites Using Digital Image Correlation Technique

Using In-Situ Polymerization of Conductive Polymers to Enhance the Electrical Properties of Solution-Processed Carbon Nanotube Films and Fibers

Electrical properties of anisotropic graphene/PDMS composites induced by aligned ferromagnetic particles

Effects of Mixed Acid Functionalization on Electric Conductance Properties of Carbon Nanotube/Epoxy Resin Composite

Facile fabrication of highly conductive polystyrene/nanocarbon composites with robust interconnected network via electrostatic attraction strategy

Preparation of short carbon fiber/polydimethylsiloxane conductive composites based on continuous spatial‐confining network assembly technique

Vertically aligned carbon nanotubes/graphene/cellulose nanofiber networks for enhancing electrical conductivity and piezoresistivity of silicone rubber composites

The effect of boron nitride on electrical conductivity of nanocarbon-polymer composites

Fabrication of Multi - Walled Carbon Nanotubes/sbs Composite and Its Electrical Percolation

Tunable Electrical and Mechanical Responses of PDMS and Polypyrrole Nanowire Composites

Anisotropic Thermal Property of Magnetically Oriented Carbon Nanotube/graphene Polymer Composites

Investigation of the surface mechanical properties of functionalized single-walled carbon nanotube (SWCNT) reinforced PDMS nanocomposites using nanoindentation analysis