Abstract:The selective localization of multiwalled carbon nanotubes (MWNTs) in immiscible polystyrene (PS)/ poly(vinylidene fluoride) (PVDF) blends (volume ratio of both components is 1/1) and its effect on composites' dielectric, thermal, and mechanical properties are systematically studied. Employing two-step mixing process can make MWNTs localize in PS or PVDF phase successfully. When three components are simply mixed together by one-step processing, the MWNTs are selectively distributed in PVDF phase, which is supported by the dielectric measurements and the SEM observations and is consistent with the wetting coefficient evaluation. For the two-step mixing, when the fillers are first mixed with PS in the first step, some of them will migrate into PVDF phase in the second step although the migration is very slow. When the overall volume fraction of MWNTs is 3.9 vol%, the selective localization of MWNTs in PVDF phase produces higher dielectric constant (e0, ca. 485) than the case when the fillers are only in PS phase (e0 of ca. 16) at 100 Hz and room temperature of 25 degrees C. Differential scanning calorimetry (DSC) measurements and mechanical tests show that the selective localization of all the fillers in PVDF phase produces little change of the melting point and crystallinity of PVDF component but slightly higher tensile strength. In contrast to the one-step mixing process, the two-step mixing to selectively localize the fillers in their favorite phase could be used to control the dielectric and mechanical properties of the materials. (C) 2013 Elsevier Ltd. All rights reserved.

Selective Location and Conductive Network Formation of Multiwalled Carbon Nanotubes in Polycarbonate/poly(vinylidene Fluoride) Blends

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Conductive Network Formation and Electrical Properties of Poly(Vinylidene Fluoride)/Multiwalled Carbon Nanotube Composites: Percolation and Dynamic Percolation

Stability of dielectric elastomer/carbon nanotube composites coupling electrostriction and polarization

Effect of the selective localization of carbon nanotubes and phase domain in immiscible blends on tunable microwave dielectric properties

Electric Field Controlled Formation and Dissociation of Multiwalled Carbon Nanotube Conductive Pathways in A Polymer Melt

Study on the Conductivity of Multiwalled Carbon Nanotubes Filled Polycarbonate/Styrene-series Polymer Composites

Low percolation threshold polyvinylidene fluoride/multi‐walled carbon nanotube composites: A perspective of electrical conductivity, crystalline, rheological and mechanical properties

Interfacial Distribution of PMMA-grafted MWCNTs in Immiscible Blends for Improved Electrical Conductivity

Electrical conductivities of carbon nanotube-filled polycarbonate/polyester blends

Effect of the Selective Localization of Carbon Nanotubes in Polystyrene/poly(vinylidene Fluoride) Blends on Their Dielectric, Thermal, and Mechanical Properties

A Facile Route to Prepare High−performance Dielectric Nanocomposites of Poly(methyl Methacrylate)/poly(vinylidene Fluoride)/carbon Nanotubes

High thermal conductivity and high electrical resistivity of poly(vinylidene fluoride)/polystyrene blends by controlling the localization of hybrid fillers

Fluoro-polymer-coated carbon nanotubes for improved interfacial interactions and dielectric properties in MWCNTs/PVDF composites

Electrical Conduction and Dynamic Rheology of Multi-Walled Carbon Nanotubes and Hydrophobic Nanosilica-Filled Immiscible Poly(Methylmethacrylate)/Polystyrene Blends

Induced electrical polarization and conductivity homogenization via internal architectural regulation in PC/PVDF/MWCNTs/PEDOT:PSS transparent conductive films

Preparation Of Conductive Polyphenylene Sulfide/Polyamide 6/Multiwalled Carbon Nanotube Composites Using The Slow Migration Rate Of Multiwalled Carbon Nanotubes From Polyphenylene Sulfide To Polyamide 6

Integration of PDA Chemistry and Surface‐Initiated ATRP to Prepare Poly(methyl Methacrylate)‐grafted Carbon Nanotubes and Its Effect on Poly(vinylidene Fluoride)–carbon Nanotube Composite Properties

Fabrication of Multi - Walled Carbon Nanotubes/sbs Composite and Its Electrical Percolation

Preparation and Electrical Properties of Multiwalled Carbon Nanotubes Filled High-density Polyethylene Composites

Enhanced Electrical Properties in Percolative Low-Density Polyethylene/carbon Nanotubes Nanocomposites