Abstract:Previous research works on solid oxide fuel cells (SOFCs) have mainly focused on the large length scale phenomena, such as physical and chemical transport phenomena at macroscale. A new approach is proposed in this work, which combines concepts from all-atom (AA) modeling with coarsegraining (CG) molecular dynamics (MD) method to reveal the replacement mechanism of Yttria-Stabilized Zirconia (YSZ) and establish the nanostructures of a NiO-based anode and an YSZ-based electrolyte. Lattice constants of NiO and YSZ are obtained by special measurements. Nanocrystalline structures of anode and electrolyte material structures under disparate conditions are generated via Atomistic Simulation Environment (ASE). By combining this technique with the local lattice constants, the effect of temperature on crystal formation and the influence of sintering conditions on the volume shrinkage are predicted. The combined AA-CG-MD method is validated and subsequently applied to an equilibrated anode and electrolyte nanostructures with a box length of 50 nm. The resulting nanostructures of the materials show good agreement with the distributions from experiments based on Transmission/Scanning Electron Microscopy (TEM/SEM) techniques, and provide insight into atom/pore distribution and the volume shrinkage at a length scale which is expanded into atomistic/molecular dynamics simulation to capture the best materials' performance and the balance of oxygen-ion conductivity and material stability.

A Phase Inversion/Sintering Process to Fabricate Nickel/Yttria-Stabilized Zirconia Hollow Fibers As the Anode Support for Micro-Tubular Solid Oxide Fuel Cells

Microstructure Tailoring of the Nickel Oxide-Yttria-Stabilized Zirconia Hollow Fibers Toward High-Performance Microtubular Solid Oxide Fuel Cells

Fabrication and Evaluation of NiO/Y2O3-stabilized-ZrO2 Hollow Fibers for Anode-Supported Micro-Tubular Solid Oxide Fuel Cells

Fabrication of Anode Supported Micro Tubular SOFCS by Dip-Coating Process on NiO/YSZ Hollow Fibers

Fabrication of Nickel-YSZ Cermet Nanofibers Via Electrospinning

Microstructure tailoring of YSZ/Ni-YSZ dual-layer hollow fibers for micro-tubular solid oxide fuel cell application

Electrochemical properties analysis of tubular NiO–YSZ anode-supported SOFCs fabricated by the phase-inversion method

Novel light-weight, high-performance anode-supported microtubular solid oxide fuel cells with an active anode functional layer

Fabrication of Y2O3-stabilized-ZrO 2(YSZ)/La0.8Sr0.2MnO3-α-YSZ dual-layer hollow fibers for the cathode-supported micro-tubular solid oxide fuel cells by a co-spinning/co-sintering technique

Reconstruction Of Anode Nanostructures For Solid Oxide Fuel Cells

Microstructure tailoring of the nickel–yttria stabilised zirconia (Ni–YSZ) cermet hollow fibres

Fabrication of Metal-Supported Tubular Solid Oxide Fuel Cell by Phase-Inversion Method and in Situ Reduction

Optimization of Ni YSZ Anodes for Tubular SOFC by a Novel and Efficient Phase Inversion-Impregnation Approach

Preparation of Fibrous Ni-coated-YSZ Anodes for Solid Oxide Fuel Cells

A dual layer Ni/Ni-YSZ hollow fibre for micro-tubular SOFC anode support with a current collector

Anode-supported Micro-Tubular SOFCs Fabricated by a Phase-Inversion and Dip-Coating Process

Improvement of the Performances of Tubular Solid Oxide Fuel Cells by Optimizing Co-Sintering Temperature of the NiO/YSZ Anode-Ysz Electrolyte Double Layers

Preparation of Yttria Stabilized Zirconia Powders with a Glycine-Nitrate Process for Intermediate-Temperature Solid Oxide Fuel Cells

Fabrication and Study on Ni1−xFexO-YSZ Anodes for Intermediate Temperature Anode-Supported Solid Oxide Fuel Cells

Micro-Tubular Solid Oxide Fuel Cells with Graded Anodes Fabricated with A Phase Inversion Method

Effects on Microstructure of NiO–YSZ Anode Support Fabricated by Phase-Inversion Method