Abstract:The response surface method was used to successfully predict the optimal addition amounts of phenolic resin and bitumen binding system for cold isostatic pressing carbon blocks as 14wt% and 2wt%, respectively, and ultra-high performance carbon blocks with a compressive strength of 104.25MPa and pore sizes below 1 μm accounted for 90.8% were predicted and prepared. We proposed the phase change densification theory for pitch successfully explaining the secondary densification of carbon blocks by pitch powder during shaping and curing. Besides, In the carbonization stage with the carbon block firing schedule, we determined that the carbon structure of pitch after carbonization with the participation of the phenolic resin matrix and organic small molecules of phenolic resin volatilization and pyrolysis consisted of lamellar carbon with a greater number of defects, and proposed that the interface between the non-graphitizable carbon after the carbonization of the phenolic resin and graphitizable carbon after the carbonization of pitch is the carbon binding mode and mechanism of the nucleation and growth of domain structures at the defects of lamellar carbon. Therefore, We determined that the mosaic and fine mosaic binding between the high strength and high brittleness non-graphitizable carbon carbonization of phenolic resin and the low strength and high ductility graphitizable carbon carbonization of pitch as well as the aforementioned carbon binding mechanism based on domain structure also were the important reasons for the performance enhancement of pitch composite phenolic resin bonded carbon blocks.

A Study of the Properties of Mesophase-Pitch-based Foam/graphitized Carbon Black Composites

Preparation and Performance of Mesophase Pitch Based Carbon Foam

Preparation and Performance of Mesophase Pitch Based Graphite Foam

Effects of Mesophase Pitch Raw Material on the Properties and Crystal Structure of Graphite Foams

Preparation of Reinforced Carbon Foams with Different Fillers

Improving carbon/carbon composites mechanical and thermal properties by the co‐carbonization of pre‐oxidized carbon fiber and pitch

Microstructure, electrical conductivity and mechanical properties of graphitization carbon foam derived from epoxy resin modified with coal tar pitch

Binding Natural Graphite with Mesophase Pitch: A Promising Route to Future Carbon Blocks

Preparation and Foaming Mechanism of Carbon Foams by Supercritical Foaming Method

Carbon Blocks from Natural Flake Graphite and Mesophase Pitch: Fabrication Processing, Microstructre, Mechanical Property, and Electrical Perfromance

The effect of the molecular structure of naphthalene-based mesophase pitch on the properties of carbon fibers derived from it

Effect of Iron Nitrite on the Preparation of Carbon Foams from Mesophase Pitch

Some Factors for the High Performances of Mesophase Pitch Based Carbon Fibre

Preparation of a novel foamed concrete modified with carbon fiber and graphite: Mechanical, electro-magnetic and microstructural characteristics based on X-CT

Microstructure and mechanical properties of carbon graphite composites reinforced by carbon nanofibers

Microstructure and mechanical properties of carbon foams and fibers reinforced carbon composites densified by CLVI and pitch impregnation

The Effect of B4C on the Properties of Graphite Foam Prepared by Template Method

Response surface optimization of pitch phase change densification using composite phenolic resin co-carbonization to prepare high performance carbon refractories

Synergistic effect of nanodiamond and titanium oxide nanoparticles on the mechanical, thermal and electrical properties of pitch‐derived carbon foam composites

Pressure-Strengthened Carbon Fibers from Mesophase PitchCarbonization Processes

Preparation and thermal conduction property of expanded graphite matrix composites