Abstract:The response surface method was used to successfully predict the optimal addition amounts of phenolic resin and bitumen binding system for cold isostatic pressing carbon blocks as 14wt% and 2wt%, respectively, and ultra-high performance carbon blocks with a compressive strength of 104.25MPa and pore sizes below 1 μm accounted for 90.8% were predicted and prepared. We proposed the phase change densification theory for pitch successfully explaining the secondary densification of carbon blocks by pitch powder during shaping and curing. Besides, In the carbonization stage with the carbon block firing schedule, we determined that the carbon structure of pitch after carbonization with the participation of the phenolic resin matrix and organic small molecules of phenolic resin volatilization and pyrolysis consisted of lamellar carbon with a greater number of defects, and proposed that the interface between the non-graphitizable carbon after the carbonization of the phenolic resin and graphitizable carbon after the carbonization of pitch is the carbon binding mode and mechanism of the nucleation and growth of domain structures at the defects of lamellar carbon. Therefore, We determined that the mosaic and fine mosaic binding between the high strength and high brittleness non-graphitizable carbon carbonization of phenolic resin and the low strength and high ductility graphitizable carbon carbonization of pitch as well as the aforementioned carbon binding mechanism based on domain structure also were the important reasons for the performance enhancement of pitch composite phenolic resin bonded carbon blocks.

Preparation and Performance of Mesophase Pitch Based Carbon Foam

Preparation and Performance of Mesophase Pitch Based Graphite Foam

Effects of Mesophase Pitch Raw Material on the Properties and Crystal Structure of Graphite Foams

Preparation and Foaming Mechanism of Carbon Foams by Supercritical Foaming Method

Some Factors for the High Performances of Mesophase Pitch Based Carbon Fibre

Effect of Iron Nitrite on the Preparation of Carbon Foams from Mesophase Pitch

Nucleation Behavior of Carbon Foam During Self Bubbling Process

Preparation of carbon foams with supercritical toluene

Preparation of Reinforced Carbon Foams with Different Fillers

The effect of the molecular structure of naphthalene-based mesophase pitch on the properties of carbon fibers derived from it

Spinnable Mesophase Pitch Prepared via Co-carbonization of Fluid Catalytic Cracking Decant Oil and Synthetic Naphthalene Pitch

Mesophase pitch raw material used for preparing high-modulus high-thermal-conductivity carbon fiber, and preparation method thereof

Influence of Oxygen Uptake on Pitch Carbon Fiber

Preparation of Mesophase Pitch with Fine-Flow Texture from Ethylene Tar/Naphthalene by Catalytic Synthesis for High-Thermal-Conductivity Carbon Fibers

Simple routes from natural graphite to graphite foams: Preparation, structure and properties

Response surface optimization of pitch phase change densification using composite phenolic resin co-carbonization to prepare high performance carbon refractories

Effects of Carbonization Pressure on Microstructure of Graphitized Pitch-derived Carbons

Preparation of Mesophase Pitch Based Mesoporous Carbons Using an Imprinting Method

Pressure-Strengthened Carbon Fibers from Mesophase PitchCarbonization Processes

Effect of Preoxidation on Microcracks in Graphite Foams

In situ Ti assisted graphitization approach for the preparation of graphite foam with light weight and high thermal conductivity