Abstract:Lithium niobate is a multi-functional material with wide reaching applications in acoustics, optics, and electronics. Commercial applications for lithium niobate require high crystalline quality currently limited to bulk and ion sliced material. Thin film lithium niobate is an attractive option for a variety of integrated devices, but the research effort has been stagnant due to poor material quality. Both lattice matched and mismatched lithium niobate are grown by molecular beam epitaxy (MBE) and studied to understand the role of substrate and temperature on nucleation conditions and material quality. Growth on sapphire produces partially coalesced columnar grains with atomically flat plateaus and no twin planes. A symmetric rocking curve shows a narrow linewidth with a full width at half-maximum (FWHM) of 8.6 arcsec (0.0024°) which is comparable to the 5.8 arcsec rocking curve FWHM of the substrate, while the film asymmetric rocking curve is 510 arcsec FWHM. These values indicate that the individual grains are relatively free of long-range disorder detectable by x-ray diffraction (XRD) with minimal measurable tilt and twist and represents the highest structural quality epitaxial material grown on lattice mismatched sapphire without twin planes. Lithium niobate is also grown on lithium tantalate producing high quality coalesced material without twin planes and with a symmetric rocking curve of 193 arcsec, which is nearly equal to the substrate rocking curve of 194 arcsec. The surface morphology of lithium niobate on lithium tantalate is shown to be atomically flat by atomic force microscopy (AFM).

Ultraviolet Patterning of Alkoxy‐Derived Lithium Niobate Film

Patterning of Lithium Niobate Thin Films Derived from Aqueous Solution

Characterization of Lithium Niobate Thin Films Derived from Aqueous Solution

Processing of highly oriented LiNbO3 thin films through ametal-organic precursor solution

LOW-TEMPERATURE PREPARATION OF NANO-CRYSTALLINE LITHIUM NIOBATE POWDERS BY THE POLYMERIC PRECURSOR METHOD

Potassium Lithium Niobate Films Derived from Aqueous Precursor Solution

Processing of Lithium Niobate and Potassium Lithium Niobate Films Using Environmentally-Friendly Aqueous Precursor Solutions

Growth of Highly Oriented LiNbO3 Thin Films Through Structure Controlled Metal Alkoxide Precursor Solution

Processing and Ultraviolet Patterning of Linbo3 Epitaxial Films from Metallorganic Precursors

Optical and Structural investigations of LiNbO3 thin films by PLD

Synthesis of Potassium Lithium Niobate Films Through Aqueous Precursor Solution

Preparation and characterization of LiNbO3 thin films derived from metal carboxylate gels

Characteristics of the precursors and their thermal decomposition during the preparation of LiNbO3 thin films by the Pechini method

Preparation and Characterization of LiNbO<sub>3</sub> Thin Films Derived from Metal Carboxylate Gels

Li3Na7B4P6O26: a new ultraviolet transparent congruently melting non-linear optical crystal

Molecular Beam Epitaxy Growth of High Crystalline Quality LiNbO$_{3}$

Effect of UV-Irradiation on Processing of Lead Titanate Thin Film Derived from Photoreactive [Pb-Ti] Precursor Modified with Alkanolamine.

LiNbO3 Thin Films through a Sol–Gel/Spin-Coating Approach Using a Novel Heterobimetallic Lithium–Niobium Precursor

Photonic crystal structures in ion-sliced lithium niobate thin films

Electro-optic Properties of Epitaxial Sr0.6Ba0.4Nb2O6 Films Grown on MgO Substrates Using LixNi2-xO Buffer Layer