Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Preparation and hydrogen storage properties of nanostructured Mg2Cu alloy

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Preparation of Mg-based hydrogen storage materials from metal nanoparticles

Scaled-Up Synthesis of Nanostructured Mg-Based Compounds and Their Hydrogen Storage Properties

Synthesis and Hydrogen Storage Behavior of Mg–Co–H System at Nanometer Scale

Synthesis and properties of nanostructured Mg2Ni-based compounds

Hydrogen Storage Properties of Ti-Cr-Mn-M (M=V, Fe, Ni, Cu) Alloys

Hydrogen storage in Mg2Ni(Fe)H4 nano particles synthesized from coarse-grained Mg and nano sized Ni(Fe) precursor

Interactions of Y and Cu on Mg2Ni type hydrogen storage alloys: A study based on experiments and density functional theory calculation

The Synthesis and Hydrogen Storage Properties of Pure Nanostructured Mg2FeH6

Microstructures and Hydrogen Storage Properties of Ti10V83-xFe6ZrMnx Alloys

Hydrogen desorption properties of the MgH2-AlH3 composites

Review on Hydrogen Storage Property and Preparation of Nanostructured Mg

Microstructures and Hydrogen Storage Properties of As-Cast and Copper-Mould-cast LaMg4Ni Alloys

Preparation and Hydrogen Sorption Properties of a Ni Decorated Mg Based Mg@Ni Nano-Composite

Phase, Microstructure and Hydrogen Storage Properties of Mg–Ni Materials Synthesized from Metal Nanoparticles

Synthesis and hydrogen storing properties of nanostructured ternary Mg–Ni–Co compounds

Preparation of the Mg<sub>2</sub>Ni compound from ultrafine particles and its hydrogen storage properties

Excellent Catalysis of Mn3O4 Nanoparticles on the Hydrogen Storage Properties of MgH2: an Experimental and Theoretical Study

Preparation and hydrogen storage properties of Mg<sub>2</sub>Ni intermetallic nanoparticles