Abstract:Traditional vibration detecting methods for rotating machines with chambers are of 'inner detecting' method, which installs transducers inside the machine chambers. But this method is heavily confined to maneuverability, safety and massive operations when applied to large scale. Contrary to the traditional methods, "outer detection" method (or non-invasive method) has its advantages. This method uses a certain non-invasive detecting method to measure the vibration and the noise of a machine, thus to obtain information as much as it can without any breakage and modification to the structure.The work described in this paper is aimed at the development of an outer detecting and analyzing system. The system uses a piezoelectric sensor as the detector, a sound card of PC as an A/D converter, a software analyzing system. It has a number of new characteristics: full functions on real-time data processing and recording; automatic fault detection and alert; multi-spectrum extended analysis functions. These mean a simpler detection method, no breakage on machine chambers, high mobility.Some faults examining experiments are completed. Especially the research is done on rotor rubbing, bearing friction and unusual multi-harmonic. Detecting methods of these faults are developed, such as fractal geometry, weight center of frequency, peak tracing and peak searching, etc. Based on the experiments, these detecting and analyzing methods have shown to be of practical use. Other features of the system include less CPU time, very suitable for real-time examinations.It is concluded that even there are many difficulties in rotating machines non-invasive method, we can still obtain some useful results.

The Application of Sound Intensity Method to the Noise Measurement of Electrical Machines with Load

Investigation of Noise Characteristics of Electric Vibrator Utilizing Acoustic Camera and Transfer Path Analysis

Identification and Evaluation of Diesel Engine Noise Source Based on Acoustic Intensity

High precision localisation of the sources of noise of a bent-axis motor

Development of an Experimental Acoustic Noise Characterization Setup for Electric Motor Drive Applications

Hybrid Method of Image Source Model and Diffuse Surface Integration for the Simulation of Room Sound Field

Measurement of Leak Location in Buried Iron Water Pipe with Acoustic Emission and EMD

Application of measurement technology of sound intensity in noise source identification of automotive interior noise

From noise to information-some applications of acoustic emission techniques in process industries

Experimental Study on the Noise Source Identification of a Diesel Engine of Passenger Car

Three-Dimensional Field Calculation and Analysis of Electromagnetic Vibration and Noise for Disk Permanent Magnet Synchronous Machines

Investigation on Main Noise Sources of Vehicle Gasoline Engine by Sound Intensity Measurement

Transmission and measurement characteristics evaluation of surface acoustic wave sensor on rotating spindle in machine tools

Measurement And Analysis Of Vibration And Noise Signals Of Rotating Machines By Non-Invasive Method

Acoustic power measurement of linear compressors

Mechanism analysis and application of ambient noise decoupling load measurement and identification model

Noise source identification of internal combustion engine using sound mode technology

Investigation of acoustic transmission beneath a railway vehicle by using statistical energy analysis and an equivalent source model

Noncontact acousto-electromagnetic measurement of mechanical resonance in electronic systems

Sound Power Measurement of Tyre/Road Noise Using the Close-Proximity (CPX) Trailer Enclosure

Cabin Noise Source-Path Identification for AD-200 Ultralight Aircraft