Abstract:Current literature on the performance characteristics of road surfaces is primarily focused on evenness, roughness and technical durability. However, other important surface properties require analysis, including noisiness, which is an important feature of the environmental impact of vehicular traffic around roads. This can be studied using various methods by which road noise phenomena are investigated. The method used to measure the noise performance of road surfaces herein is the Statistical Pass-By (SPB) method, as described in ISO 11819-1:1997. The impedance tube method was used for sound absorption testing, as described in ISO 13472-2:2010. These tests were performed under a variety of conditions: in situ and in laboratory. The existence of relationships between them can be helpful in selecting surfaces for noise reduction. Preliminary surface noise tests can be performed in the laboratory with samples consisting of various compounds. This is less expensive and faster than doing so on purpose-built surfaces. The paper presents study results for sound absorption coefficients of various types of low-noise surfaces in in situ conditions (on an experimental section and on operated road sections) and in the laboratory setting. The results of the tests performed on the operational sections were compared to the results of the surface impact on road noise using the SPB method. The correlations between the test results help confirm the feasibility of road surface pre-testing in the laboratory and the relation to tests performed using the SPB method under typical operating conditions.

Sound Power Measurement of Tyre/Road Noise Using the Close-Proximity (CPX) Trailer Enclosure

On application of sound power radiation of rolling tyre measured using CPX-based methodology

Assessment of Sound Pressure of Transient Noise Radiated from Vehicle-Bridge Coupling Vibration

The Application of Sound Intensity Method to the Noise Measurement of Electrical Machines with Load

Quantitative Measurement of Pass-by Noise Radiated by Vehicles Running at High Speeds

Evaluation of tyre/road noise and texture interaction on rubberised and conventional pavements using CPX and profiling measurements

Prediction and Optimization of Full-Vehicle Road Noise Based on Random Response Analysis

Design of test method for noise emitted by light-duty vehicles in real driving conditions

Investigation of Acoustic Properties of Different Types of Low-Noise Road Surfacers under In Situ and Laboratory Conditions

Synthesis of equivalent sources for tyre/road noise simulation and analysis of the vehicle influence on sound propagation

An approach for indoor prediction of the pass-by noise of a vehicle based on the time-domain equivalent source method

Adjusted Controlled Pass-By (CPB) Method for Urban Road Traffic Noise Assessment

Influence of Operational Parameters on Tyre Noise in Semi-Anechoic Chamber

A Study on the Directivity of Near-field Noise of Truck Tire

Analysis of Coast-by Noise of Heavy Truck Tires

Research and application of combined noise reduction method by using noise reducing pavement and noise barrier

Laboratory and field evaluation of noise characteristics of porous asphalt pavement

The calculation of road traffic noise spectrum based on the noise spectral characteristics of single vehicles

Tailored for vehicle horn: A novel sound source capture method

Realization and application of a backward- multiple reference transfer path analysis method for road noise analysis

Experimental Study on C3 Tire Pass-by Noise