Abstract:The present work proposes to investigate the effect of an ultrahigh molecular weight silicone rubber (UHMW-SR) and two ethylene methyl acrylate copolymers (EMA) with different methyl acrylate (MA) content on the mechanical and fire performance of a fireproof acrylonitrile butadiene styrene copolymer (ABS) composite, with an optimum amount of ammonium polyphosphate (APP) and aluminum diethyl phosphinate (AlPi). ABS formulations with a global flame retardant weight content of 20 wt.% (ABS P) were melt-compounded, with and without EMA and UHMW-SR, in a Brabender mixer. During this batch process, ABS P formulations with UHMW-SR and/or EMA registered lower torque values than those of ABS P. By means of scanning electron microscopy (SEM), it was possible to observe that all ABS composites exhibited a homogenous structure without phase separation or particle agglomeration. Slightly improved interfacial interaction between the well-dispersed flame-retardant particles in the presence of EMA and/or UHMW-SR was also noticed. Furthermore, synergies in mechanical properties by adding both EMA and UHMW-SR into ABS P were ascertained. An enhancement of molecular mobility that contributed to the softening of ABS P was observed under dynamic mechanical thermal analysis (DMTA). An improvement of its flexibility, ductility and toughness were also registered under three-point-bending trials, and even more remarkable synergies were noticed in Charpy notched impact strength. Particularly, a 212% increase was achieved when 5 wt.% of EMA with 29 wt.% of MA and 2 wt.% of UHMW-SR in ABS P (ABS E29 S P) were added. Thermogravimetric analysis (TGA) showed that the presence of EMA copolymers in ABS P formulations did not interfere with its thermal decomposition, whereas UHMW-SR presence decreased its thermal stability at the beginning of the decomposition. Although the addition of EMA or UHMW-SR, as well as the combination of both in ABS P increased the pHRR in cone calorimetry, UL 94 V-0 classification was maintained for all flame-retarded ABS composites. In addition, through SEM analysis of cone calorimetry sample residue, a more cohesive surface char layer, with Si-O-C network formation confirmed by Fourier transform infrared (FTIR), was shown in ABS P formulations with UHMW-SR.

DEVELOPMENT OF TOUGHENING FLAME-RETARDANT MASTERBATCHES AND APPLICATION OF MODIFIED ABS

Research on Toughening of Flame-retardant PBT/ABS Alloys

Improving the flame retardancy and mechanical properties of high-density polyethylene-g-maleic anhydride with a novel organic metal phosphonate

Abs/蒙脱土纳米复合材料的制备、结构及性能

Research on effect of ABS,MAH,DCP on property of PA6/ABS blend

Phosphorus-Based Flame-Retardant Acrylonitrile Butadiene Styrene Copolymer with Enhanced Mechanical Properties by Combining Ultrahigh Molecular Weight Silicone Rubber and Ethylene Methyl Acrylate Copolymer

Preparation and Mechanical Properties of Toughened ABS Resin via Bulk Polymerization

Toughening of Poly(butylene Terephthalate) with Epoxy-Functionalized Acrylonitrile–butadiene–styrene

Properties of Poly(butylene Terephthalate)/bisphenol A Polycarbonate Blends Toughening with Epoxy-Functionalized Acrylonitrile–Butadiene–Styrene Particles

Acrylonitrile–Butadiene–Styrene Terpolymer with Metal Hypophosphites: Flame Retardance and Mechanism Research

Study on Flame-retardant PC/ABS Alloy with High-Strength and Heat-resistance

Modification of ABS/PVC Blend

Toughening of PBT/PC Blends with Core-Shell Modifier

Effect of Reactive Group Types on the Properties of Core-Shell Modifiers Toughened PA6

Investigation of the Properties of Epoxy-Functionalized Acrylonitrile-butadiene-styrene Toughened Poly (butylene Terephthalate) and Its Blends

Toughening and Strengthening Modification of Flame-Retardant High-Impact Polystyrene

Novel Intumescent Flame Retardant Masterbatch Prepared Through Different Processes and Its Application in EPDM/PP Thermoplastic Elastomer: Thermal Stability, Flame Retardancy, and Mechanical Properties

Effect of ABS types on the morphology and mechanical properties of PA6/ABS blends by in situ reactive extrusion

Preparation and Characterization of Flame Retardant Abs/Montmorillonite Nanocomposite

Blends of rABS and SEBS: Influence of In-Situ Compatibilization on the Mechanical Properties

Compounding Flame Retardancy of Triphenyl Phosphate and Alpha Zirconium Phosphate for Polycarbonate/Acrylonitrile-Butadiene-Styrene Blends