Abstract:Solid concentration and particle velocity distributions in the transition section of a ϕ 200mm turbulent fluidized bed (TFB) and a ϕ 200mm annulus turbulent fluidized bed (A-TFB) with a ϕ 50mm central standpipe were measured using a PV6D optical probe. It is concluded that in turbulent regime, the axial distribution of solid concentration in A-TFB was similar to that in TFB, but the former had a shorter transition section. The axial solid concentration distribution, probability density, and power spectral distributions revealed that the standpipe hindered the turbulence of gas–solid two-phase flow at a low superficial gas velocity. Consequently, the bottom flow of A-TFB approached the bubbling fluidization pattern. By contrast, the standpipe facilitated the turbulence at a high superficial gas velocity, thus making the bottom flow of A-TFB approach the fast fluidization pattern. Both the particle velocity and solid concentration distribution presented a unimodal distribution in A-TFB and TFB. However, the standpipe at a high gas velocity and in the transition or dilute phase section significantly affected the radial distribution of flow parameters, presenting a bimodal distribution with particle concentration higher near the internal and external walls and in downward flow. Conversely, particle concentration in the middle annulus area was lower, and particles flowed upward. This result indicated that the standpipe destroyed the core-annular structure of TFB in the transition and dilute phase sections at a high gas velocity and also improved the particle distribution of TFB. In conclusion, the standpipe improved the fluidization quality and flow homogeneity at high gas velocity and in the transition or dilute phase section, but caused opposite phenomena at low gas velocity and in the dense-phase section.

Structural Parameters and Application Performance of Static Tubular Mixer with Tube-arrays

Solid Concentration and Velocity Distributions in an Annulus Turbulent Fluidized Bed

Numerical investigation on the intensification of coaxial slurry mixing systems

Structural Parameter Optimization of Hydraulic Vertox Separator in Recirculating Biofloc Technology System Based on Computational Fluid Dynamics

Structure effect of industrial loop reactors on non-uniform flow characteristics

Experimental Study on Coaxial Mixer Based on Critical Uniform Dispersion of Floating Particles

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Mixing performance of helical secondary-flow mixer used in coagulation

A novel design of in-line static mixer for permanganate/bisulfite process: Numerical simulations and pilot-scale testing

Micro-vortex Control and Multi-intensified Water Treatment Integrated Technology and Its Application

Design and Numerical Simulation of Water-fertilizer Mixer

Using in-line static mixers to intensify gas–liquid mass transfer processes

Study on optimal design of vertical-shaft mechanical mixer based on numerical simulation of flow field

Numerical Simulation of Mixing Processes for Pseudoplastic Fluids in Industrial Scale Stirred Tank Agitated by Two Types of Impellers

Mixing Performance of an Inline High-Shear Mixer with a Novel Pore-Array Liquid Distributor

Comparative studies of fluid mixing and heat transfer behaviors in a millimeter scale T-type mixer with triangular baffles

A Parameter Study of Tube Bundle Heat Exchangers for Fouling Rate Reduction

Characteristics of the Dynamic Distribution of Suspended Particles in the Flocculation Process

Optimization of Mechanical Accelerated Clarifier Based on Numerical Simulation of Flow Field

Fouling mitigation in tubular membranes by 3D-printed turbulence promoters