Abstract:The hydrodynamics of solid-liquid mixing process in a stirred tank with four pitched-blade impellers, fractal 1 impellers, and fractal 2 impellers were investigated using computational fluid dynamics (CFD) simulation. An Eulerian-Eulerian approach, standard k-epsilon turbulence model, and multiple reference frames (MRF) technique were employed to simulate the solid-liquid two-phase flow, turbulent flow, and impeller rotation, respectively. The effects of impeller speed, impeller type, impeller spacing, impeller blade tilt angle, impeller blade shape, solid particle size and initial solid particle loading on the solid particle suspension quality were investigated. Results showed that the homogenous degree of solid-liquid system increased with the increase of impeller speed. The impeller spacing of T5/6 and T and impeller blade tilt angle of 60 degrees and 45 degrees were appropriate for the solid-liquid suspension process. Fractal shape impeller was more efficient than jagged shape impeller in solid-liquid mixing process. Larger particle diameter and higher initial solid particle loading resulted in less homogenous distribution of solid particles. It was found that fractal impeller could improve the solid particle suspension quality compared with four pitched-blade impeller under the same power consumption, increasingly so with the fractal iteration number of fractal impeller. Moreover, fractal impeller reduced the size of impeller trailing vortex and consumed less power consumption compared with four pitched-blade impeller at the same impeller speed, and the more the number of fractal iteration, the higher the impeller energy utilization rate of fractal impeller. (C) 2019 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.

Numerical Simulation of Mixing Processes for Pseudoplastic Fluids in Industrial Scale Stirred Tank Agitated by Two Types of Impellers

Computational Fluid Dynamics Simulation of Hydrodynamics in an Uncovered Unbaffled Tank Agitated by Pitched Blade Turbines

Numerical Investigation of Hydrodynamics and Heat Transfer for Bingham-pseudoplastic Fluids in an Industrial Coiled Stirred Tank

Numerical simulation of fluid mixing reinforcement in micro-mixers with barriers embedded

Numerical Simulation of Power Consumption and Mixing Characteristics of Novel Large-Double-blade Impeller

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Numerical Simulation of Hydrodynamics and Mixing Characteristics of High-Viscosity Non-Newtonian Fluid in Twin-Shaft Kneaders

Micro-Mixing Enhancement in a Taylor-Couette Reactor Using the Inner Rotors with Various Surface Configurations

Experimental Study on Micromixing Characteristics of Novel Large-Double-blade Impeller

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Micromixing Simulation of Novel Large-Double-Blade Impeller

Numerical Simulation of Power Consumption and Mixing Characteristic in Stirred Vessel with Novel Coaxial Mixer

Simulation Analysis of Power Consumption and Mixing Time of Pseudoplastic Non-Newtonian Fluids with a Propeller Agitator

Numerical simulation of mixing process in a stirred tank agitated by side-entering agitators

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

Power Consumption and Flow Field Characteristics of a Coaxial Mixer with a Double Inner Impeller

Experimental Study of Influence of the Impeller Spacing on Flow Behaviour of Double‐Impeller Stirred Tank

Numerical Simulation of Solid-Liquid Mixing Characteristics in a Stirred Tank with Fractal Impellers

The Influence of Impeller Combination on the Gas-Liquid Dispersion Performance of a Coaxial Mixer in Viscous Fluids

Experimental and Numerical Studies of the Flow Field in a Stirred Tank Equipped with Multiple Side‐Entering Agitators

Numerical optimization for blades of Intermig impeller in solid–liquid stirred tank