Abstract:Synthesis of porous titania via mechanical activation of natural ilmenite and subsequent simultaneous dissolution and hydrolysis in dilute solutions of sulfuric acid was investigated by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), N2 adsorption/desorption measurements, energy-dispersive X-ray spectrometry (EDX) and thermogravimetric analysis (TG). This is a novel template-free approach for synthesis of microporous, mesoporous and micro–mesoporous TiO2 materials. Effects of sulfuric acid concentration and calcination temperature on physicochemical properties of the TiO2 materials were examined systematically. The results show that both the factors considerably affected the porosity of the materials. In a 15% acid solution a microporous TiO2 hydrolysate with BET surface area 109.3m2/g was prepared. With a 10% H2SO4, we obtained a more pure micro/mesopore TiO2 hydrolysate with BET area of 257.6m2/g. Calcining the hydrolysate at ⩾500°C led to the formation of a mesopore TiO2. The mesoporous TiO2 generated at 600°C still has a BET area of 92.1m2/g. The high thermal stability is probably related to the presence of H2SO4 in the channel walls of hydrolysate. The XRD analysis indicated all the TiO2 materials prepared in this study being rutile. The mechanism for formation of the porous rutile TiO2 is mainly via in situ hydrolysis and precipitation of the dissolved titanium on the un-reacted ilmenite surface, where H2SO4 may play a very important role.

Fabrication of ordered macroporous rutile titania at low temperature

Low‐Temperature Growth of Monolayer Rutile TiO2 Nanorod Films

Low-temperature preparation of titania nanorods through direct oxidation of titanium with hydrogen peroxide

Ordered Mesoporous Thin Films Of Rutile Tio2 Nanocrystals Mixed With Amorphous Ta2o5

Synthesis of Nanocrystal Titania Sol with Different Ratio of Rutile and Anatase at Low Temperature

UV/ozone-assisted Low Temperature Preparation of Mesoporous TiO2with Tunable Phase Composition and Enhanced Solar Light Photocatalytic Activity

Large-Scale Preparation Of Ordered Titania Nanorods With Enhanced Photocatalytic Activity

Sol-Gel Preparation of N-doped TiO2 Nanocrystalline at Low Temperature

Titania Nanowires Synthesized by Thermal Oxidation of Ti Plates in Vacuum

Hollow TiO 2 microspheres assembled with rutile mesocrystals: Low-temperature one-pot synthesis and the photocatalytic performance

Low‐Temperature Preparation of Anatase and Rutile Layers on Titanium Substrates and Their Ability to Induce in Vitro Apatite Deposition

Sol–gel Synthesis of Macroporous TiO 2 from Ionic Precursors Via Phase Separation Route

Preparation of porous rutile titania from ilmenite by mechanical activation and subsequent sulfuric acid leaching

Low Temperature Synthesis and Photocatalytic Activity of Rutile TiO2 Nanorod Superstructures

Synthesis of nanocrystalline rutile titania by Co-thermal hydrolysis of TiCl4 and TiCl3 solutions

Fabrication Of Macroporous Titanium Dioxide Film Using Pmma Microspheres As Template

Fabrication Of Nanostructured Titania Thin Film At Low Temperature

Preparation of Rutile TiO<sub>2</sub> Film by Low Temperature Hydrothermal

Synthesis of Nanosized Rutile TiO2 Powder at Low Temperature

Low-Temperature and Rapid Fabrication of Bulk Nano-TiO2 Ceramic

Preparation of nano rutile titania powders with high photocatalytic properties