Abstract:Objective: To test the hypothesis that the Weibull moduli of single- and multilayer ceramics are controlled primarily by the structural reliability of the core ceramic.Methods. Seven groups of 20 bar specimens (25 x 4 x 1.2 mm) were made from the following materials: (1) IPS Empress--a hot-pressed (HP) leucite-based core ceramic; (2) IPS Empress2--a HP lithia-based core ceramic; (3 and 7) Evision--a HP lithia-based core ceramic (ES); (4) IPS Empress2 body--a glass veneer; (5) ES (1.1 mm thick) plus a glaze layer (0.1 mm); and (6) ES (0.8 mm thick) plus veneer (0.3 mm) and glaze (0.1 mm). Each specimen was subjected to four-point flexure loading at a cross-head speed of 0.5 mm/min while immersed in distilled water at 37 degrees C, except for Group 7 that was tested in a dry environment. Failure loads were recorded and the fracture surfaces were examined using SEM. ANOVA and Duncan's multiple range test were used for statistical analysis. Results: No significant differences were found between the mean flexural strength values of Groups 2, 3, 5, and 6 or between Groups 1 and 4 (p>0.05). However, significant differences were found for dry (Group 7) and wet (Groups 1-6) conditions. Glazing had no significant effect on the flexural strength or Weibull modulus. The strength and Weibull modulus of the ES ceramic were similar to those of Groups 5 and 6. Significance: The structural reliability of veneered core ceramic is controlled primarily by that of the core ceramic.

Correlation between Weibull moduli for tensile and bending strength of brittle ceramics: a numerical simulation analysis based on a three-parameter Weibull distribution

The Weibull Distribution on Reliability Evaluation of Mechanical Property for Impaction Bone Grafting

Standardized Weibull statistics of ceramic strength

Description of the statistical variations of the measured strength for brittle ceramics: A comparison between two-parameter Weibull distribution and normal distribution

Is a Three-Parameter Weibull Function Really Necessary for the Characterization of the Statistical Variation of the Strength of Brittle Ceramics?

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

Weibull Statistical Analysis Of Bending Strength Of Quartz Ceramic

Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

Preliminary Study on the Determination of the Weibull Modulus of Strength Distribution in Quasi-Brittle Materials

A new probability index for estimating Weibull modulus for ceramics with the least-square method

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

The Efficiency of Normal Distribution in Statistical Characterization of the Experimentally Measured Strength for Ceramics

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Weibull Distribution Analysis of the Flexural Strength of Dental Zirconia Ceramics

Bimodulus constitutive models and the simulation on bending properties of woven carbon fibre-reinforced composites

Probability distribution of notch strength of ceramics - (II) prediction of probability distribution of notch strength

Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures

Theoretical Statistical Solution and Numerical Simulation of Heterogeneous Brittle Materials