Abstract:Fracture of brittle ceramics initiated from shallow surface cracks comparable to their average grain sizes (G) can fluctuate significantly. Such fluctuations can contain crucial information on the inherent relations between the average grain size G and bulk ceramic properties such as the tensile strength f(t) and fracture toughness K-IC. It was proposed in this study that the characteristic crack a*(ch) = 0.25(K-IC/f(t))(2) = constant x G, inspired by observations of strength distributions with different a*(ch)/G ratios. It was found that normal distributions with the smallest standard deviation exist around a*(ch) = (2.53.5) x G, based on quasi-brittle fracture results of four different ceramics with G from 2 to 20 mu m and shallow surface cracks from 100 nm to 650 mu m. Using the average value of the relative characteristic crack a*(ch)/G approximate to 3, the mean and standard deviation (sigma) were determined by normal distributions for both the tensile strength ft and fracture toughness K-IC. Quasi-brittle fracture of those fine-grained ceramics based on the mean values and standard deviations was thus predicted. The upper and lower bounds with 96% reliability (+/- 2 sigma) specified by the normal distributions covered nearly all experimental data ranging from the strength-controlled to toughness-controlled asymptotic limits, and quasi-brittle fracture between the two. With the knowledge of the average grain size G, the tensile strength f(t) becomes the sole parameter required to describe the entire fracture range. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Is a Three-Parameter Weibull Function Really Necessary for the Characterization of the Statistical Variation of the Strength of Brittle Ceramics?

Description of the statistical variations of the measured strength for brittle ceramics: A comparison between two-parameter Weibull distribution and normal distribution

Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?

Correlation between Weibull moduli for tensile and bending strength of brittle ceramics: a numerical simulation analysis based on a three-parameter Weibull distribution

The Efficiency of Normal Distribution in Statistical Characterization of the Experimentally Measured Strength for Ceramics

Standardized Weibull statistics of ceramic strength

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

Prediction of Ceramic Fracture with Normal Distribution Pertinent to Grain Size

Weibull Statistical Analysis Of Bending Strength Of Quartz Ceramic

Monte Carlo Simulation of Complex Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials: A 3D Study

Preliminary Study on the Determination of the Weibull Modulus of Strength Distribution in Quasi-Brittle Materials

Theoretical Statistical Solution and Numerical Simulation of Heterogeneous Brittle Materials

Monte Carlo Simulation of Complex 2D Cohesive Fracture in Random Heterogeneous Quasi-Brittle Materials

Failure criterion for brittle materials with U‐notches: Unification of characteristic length‐based and grain size‐based criteria

Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

Study on Strength Distribution and Failure Probability for IG 110

Failure of Griffith Theory on Prediction of Theoretical Strength of Ideal Materials

Applications of the Four Function Weibull Equation in the Design of Brittle Components

Probabilistic estimation of impact fracture strength of ceramics.