Abstract:Fracture of brittle ceramics initiated from shallow surface cracks comparable to their average grain sizes (G) can fluctuate significantly. Such fluctuations can contain crucial information on the inherent relations between the average grain size G and bulk ceramic properties such as the tensile strength f(t) and fracture toughness K-IC. It was proposed in this study that the characteristic crack a*(ch) = 0.25(K-IC/f(t))(2) = constant x G, inspired by observations of strength distributions with different a*(ch)/G ratios. It was found that normal distributions with the smallest standard deviation exist around a*(ch) = (2.53.5) x G, based on quasi-brittle fracture results of four different ceramics with G from 2 to 20 mu m and shallow surface cracks from 100 nm to 650 mu m. Using the average value of the relative characteristic crack a*(ch)/G approximate to 3, the mean and standard deviation (sigma) were determined by normal distributions for both the tensile strength ft and fracture toughness K-IC. Quasi-brittle fracture of those fine-grained ceramics based on the mean values and standard deviations was thus predicted. The upper and lower bounds with 96% reliability (+/- 2 sigma) specified by the normal distributions covered nearly all experimental data ranging from the strength-controlled to toughness-controlled asymptotic limits, and quasi-brittle fracture between the two. With the knowledge of the average grain size G, the tensile strength f(t) becomes the sole parameter required to describe the entire fracture range. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Probability distribution of notch strength of ceramics - (II) prediction of probability distribution of notch strength

The Weibull Distribution on Reliability Evaluation of Mechanical Property for Impaction Bone Grafting

Description of the statistical variations of the measured strength for brittle ceramics: A comparison between two-parameter Weibull distribution and normal distribution

The Efficiency of Normal Distribution in Statistical Characterization of the Experimentally Measured Strength for Ceramics

Prediction of Ceramic Fracture with Normal Distribution Pertinent to Grain Size

Statistics of ceramic strength: Use ordinary Weibull distribution function or Weibull statistical fracture theory?

Standardized Weibull statistics of ceramic strength

On Preliminary experimental determination and theoretical prediction of notch strength

A new probability index for estimating Weibull modulus for ceramics with the least-square method

Weibull Statistical Analysis Of Bending Strength Of Quartz Ceramic

Weibull Distribution Analysis of the Flexural Strength of Dental Zirconia Ceramics

Correlation between Weibull moduli for tensile and bending strength of brittle ceramics: a numerical simulation analysis based on a three-parameter Weibull distribution

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

Failure criterion for brittle materials with U‐notches: Unification of characteristic length‐based and grain size‐based criteria

Reliable evaluation of fracture toughness in ceramics via nanosecond laser notching method

A Weibull distribution-based method for the analysis of concrete fracture

Study on Strength Distribution and Failure Probability for IG 110

Probabilistic estimation of impact fracture strength of ceramics.

Reliability prediction of a microwave sintered Si<sub>3</sub>N<sub>4</sub>-based composite ceramic tool

Notch fatigue behavior of needled C/SiC composite under random vibration loading

Effects Of Notch Geometry On The Local Cleavage Fracture Stress Sigma(F)