Abstract:TiC ceramics have become one of the most potential ultra-high temperature structural materials, because of its high melting point, low density, and low price. However, the poor mechanical properties seriously limit its development and application. In this work, this review follows PRISMA standards, the mechanism of the second phase (particles, whiskers, and carbon nanotubes) reinforced TiC ceramics was reviewed. In addition, the effects of the second phase on the microstructure, phase composition and mechanical properties of TiC ceramics were systematically studied. The addition of carbon black effectively eliminates the residual TiO2 in the matrix, and the bending strength of the matrix is effectively improved by the strengthening bond formed between TiC; SiC particles effectively inhibit the grain growth through pinning, the obvious crack deflection phenomenon is found in the micrograph; The smaller grain size of WC plays a dispersion strengthening role in the matrix and makes the matrix uniformly refined, and the addition of WC forms (Ti, W) C solid solution, WC has a solid solution strengthening effect on the matrix; SiC whiskers effectively improve the fracture toughness of the matrix through bridging and pulling out, the microscopic diagram and mechanism diagram of SiC whisker action process are shown in this paper. The effect of new material carbon nanotubes on the matrix is also discussed; the bridging effect of CNTs can effectively improve the strength of the matrix, during sintering, some CNTs were partially expanded into GNR, in the process of crack bridging and propagation, more fracture energy is consumed by flake GNR. Finally, the existing problems of TiC-based composites are pointed out, and the future development direction is prospected.

Experimental Description of Thermomechanical Properties of Carbon Fiber-Reinforced Tic Matrix Composites

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Elevated Temperature Mechanical and Thermophysical Properties of Titanium Carbide Particle-Reinforced Tungsten Composites

Room‐/High‐Temperature Mechanical Properties of Titanium Matrix Composites Reinforced with Discontinuous Carbon Fibers

Thermomechanical Properties of TiC Particle-Reinforced Tungsten Composites for High Temperature Applications

Mechanical properties of short carbon fiber-reinforced TiC composites produced by hot pressing

Effect of TiC Content on Microstructure and Mechanical Properties of High-temperature Titanium Matrix Composites

Strengthening and toughening of TiC ceramics by short carbon fibers

The microstructure and elevated temperature strength of tungsten-titanium carbide composite

Mechanical Properties of a Carbon Fiber Reinforced Self-Healing Multilayered Matrix Composite at Elevated Temperatures

A Meso-Mechanical Constitutive Model of Particle-Reinforced Titanium Matrix Composites at High Temperatures

General Science and Technical Report of “Long-time Ablative Behavior of C/C Composites Under High-temperature Conditions and Their Improvement Methods”

Variation of Thermal Expansion of Carbon/carbon Composites from 850 to 2500°C

Experimental Study of High-Temperature Tensile Mechanical Properties of 3D Needled C/C–SiC Composites

Investigation on the Microstructure, Room and High Temperature Mechanical Behaviors and Strengthening Mechanisms of the (tib+tic)/tc4 Composites

Microstructural evolution, mechanical and thermal properties of TiC-ZrC-Cr3C2 composites

Microstructure and Mechanical Properties of Carbide Reinforced TiC-Based Ultra-High Temperature Ceramics: A Review

High Temperature Mechanical Properties of a Laser Melting Deposited TiC/TA15 Titanium Matrix Composite

Mechanical Properties and Strengthening Effects of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperatures

Thermophysical Properties of TiCp/W Composites

High temperature mechanical properties of TiC particle reinforced titanium composites