Abstract:In this article, a fully integrated 1.0–11.0-GHz wideband distributed power amplifier (DPA) monolithic microwave integrated circuit (MMIC) design is presented. Particularly, a coupled technique with bandpass (CTB) characteristic between the kth output node and the ( $k+1$ )th input node of amplification units (AUs) is adopted in the DPA design. It generates an additional signal reuse path (SRP) to reuse part of the output signal to superimpose the input signal, and then they will be reamplified to the output artificial transmission line (O-ATML). Moreover, due to the bandpass characteristic, the signal reuse can be manipulated to target the upper cutting edges of the working band to alleviate sharp gain and power roll-off. By carefully controlling the SRP, the overall gain, output power, and bandwidth are enhanced and extended. The systematic design approach for the DPA is detailed with circuit implementations and optimizations. To validate the proposed concept, a DPA MMIC prototype is implemented and fabricated in a commercial 0.25- $\mu $ m gallium nitride (GaN)-on-silicon carbide (SiC) high-electron-mobility transistor (HEMT) process. It shows the compact layout within a die size of 3.36 mm2. Under 28-V VDD power supply, the measured results show a flat $14.8\pm 1.0$ -dB small-signal gain with 10.0-GHz wide operating bandwidth and good impedance matching conditions. A saturated output power ( ${P} _{\text {sat}}$ ) of 7.25 W with peak power-added efficiency (PAE) exceeding 38.7% is achieved. The proposed DPA obtains around 1.54–2.16-W/mm2 power density associated with an average PAE of 34.5% over the entire frequency range.

Principle and design of 0.02～2 GHz GaN distributed power amplifier

Design and Realization of a Multi Octave GaN Distributed Power Amplifier

Design of X/Ku Dual-Wideband GaN Power Amplifier MMIC Based on Coupled Multiresonator Matching Networks

X-Band High-Efficiency Continuous Class B Power Amplifier Gan Mmic Assisted By Input Second-Harmonic Tuning

Design of GaN Based Multi-Octave Wideband Power Amplification Circuit

A Broadband High-Efficiency Quasi Class E Internally-matched GaN Power Amplifier with a Compact Band-Pass Output Matching Structure

Class F and Inverse Class F Dual Modes Dual Bands Power Amplifier

Gain and Power Enhancement With Coupled Technique for a Distributed Power Amplifier in 0.25- μm GaN HEMT Technology

Design of A Compact 2–6 GHz High-Efficiency and High-Gain GaN Power Amplifier

Design and Implementation of a 1-2 GHz Wideband GaN Power Amplifier

Gain and Power Enhancement with Coupled Technique for a Distributed Power Amplifier in 0.25- μm GaN HEMT Technology

Gain and Power Enhancement with Coupled Technique for a Distributed Power Amplifier in 0.25-$\Mu$m GaN HEMT Technology

Design of Broadband High-Gain GaN MMIC Power Amplifier Based on Reactive/resistive Matching and Feedback Technique

A 2.6ghz Class-AB GaN Power Amplifier with Maximum Output Power of 56W Achieving 70% Power Added Efficiency

A 30Mhz-3Ghz 1W Stacked-Fet GaAs MMIC Power Amplifier.

Internally Harmonic Matched Compact GaN Power Amplifier with 78.5% PAE for 2.45 GHz Wireless Power Transfer Systems

A 4.5-W, 18.5–24.5-Ghz GaN Power Amplifier Employing Chebyshev Matching Technique

Design of a 2-W Wideband Power Amplifier MMIC in 0.15μm PHEMT Technology.

Development of broadband amplifier based on GaN HEMTs

A study on GaN-based high-efficiency class E power amplifier circuits at medium-low frequencies

The Design and Analysis of a 25-Watt Broad-Band GaN HEMT-Based Power Amplifier