Abstract:Magnesium matrix composites reinforced with a network of TiC and TiB2 compounds have been successfully synthesized via an in-situ reactive infiltration technique. In this process, the ceramic reinforcing phases, TiC and TiB2, were synthesized in-situ from the starting powders of Ti and B4C without any addition of a third metal powder such as Al. The molten AZ91 magnesium alloy infiltrates the preform of 3Ti–B4C by capillary forces. Furthermore, adding different weight percentages of MgH2 powder to the 3Ti–B4C preforms was used in an attempt to increase the Mg content in the fabricated composites. The results reveal a relatively uniform distribution of the reinforcing phases in the magnesium matrix with very small amounts of residual Ti, boron carbide and intermediate phases when they are fabricated at 900 °C for 1.5 h using a 3Ti–B4C preform with 70% relative density. On the other hand, after adding MgH2 to the 3Ti–B4C preform, TiCx and TiB2 formed completely without any residual intermediate phases with the formation of the ternary compound (Ti2AlC) at the expense of TiC. The percentage of reinforcing phases can be tailored by controlling the weight percentages of MgH2 powder added to the 3Ti–B4C preform. The results of the in-situ reaction mechanism investigation of the Ti–B4C and Mg–B4C systems show that the molten magnesium not only infiltrates through the 3Ti–B4C preform and thus densifies the fabricated composite as a matrix metal, but also acts as an intermediary making the reaction possible at a lower temperature than that required for solid-state reaction between Ti and B4C and accelerates the reaction rate. The investigation of the in-situ reaction mechanism with or without the addition of MgH2 powder to the 3Ti–B4C preforms reveals similar mechanisms. However, the presence of the MgH2 in the preform accelerates the reaction resulting in a shorter processing time for the same temperatures.

In Situ Synthesis of TiB<sub>2</sub>/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium

In Situ Synthesis of TiB<sub>2</sub>/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium

In Situ Synthesis of TiB2/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

NewIn-situ Synthesis Method of Magnesium Matrix Composites Reinforced with TiC Particulates

The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates

New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites

In Situ Formation of Titanium Diboride/Magnesium Titanate Composites by Magnesiothermic-Based Combustion Synthesis

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy

In Situ Fabrication of (tib+al_2o_3)/ti Matrix Composites

Understanding the reaction mechanism of in-situ synthesized (TiC–TiB2)/AZ91 magnesium matrix composites

In situ Al-TiB composite obtained by stir casting

In-situ synthesized (TiB+TiC)/Ti matrix composites

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Formation of TiB2-MgAl2O4 Composites by SHS Metallurgy

In Situ Synthesis And Compressive Deformation Behaviors Of Tic Reinforced Magnesium Matrix Composites

Synthesis of Al7075/TiB2-Al2O3 In-Situ Hybrid Composite by Stir Casting Method

In Situ Synthesis and Damping Capacities of Tic Reinforced Magnesium Matrix Composites

In Situ Synthesis of TiB<sub>2</sub>/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium

In Situ Synthesis of TiB&lt;sub&gt;2&lt;/sub&gt;/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium

In Situ Synthesis of TiB2/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium

In Situ Combustion Synthesis of TiB<sub>2</sub>-AIN Composites

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

NewIn-situ Synthesis Method of Magnesium Matrix Composites Reinforced with TiC Particulates

The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates

New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites

In Situ Formation of Titanium Diboride/Magnesium Titanate Composites by Magnesiothermic-Based Combustion Synthesis

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy

In Situ Fabrication of (tib+al_2o_3)/ti Matrix Composites

Understanding the reaction mechanism of in-situ synthesized (TiC–TiB2)/AZ91 magnesium matrix composites

In situ Al-TiB composite obtained by stir casting

In-situ synthesized (TiB+TiC)/Ti matrix composites

Microstructures and mechanical properties of in-situ TiB2/Al-Si-Mg composites

Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Formation of TiB2-MgAl2O4 Composites by SHS Metallurgy

In Situ Synthesis And Compressive Deformation Behaviors Of Tic Reinforced Magnesium Matrix Composites

Synthesis of Al7075/TiB2-Al2O3 In-Situ Hybrid Composite by Stir Casting Method

In Situ Synthesis and Damping Capacities of Tic Reinforced Magnesium Matrix Composites

In Situ Synthesis of TiB<sub>2</sub>/Mg Composites by Flux-Assisted Synthesis Reaction of the Al-Ti-B System in Molten Magnesium