Abstract:Deformation processing is a key strategy to improve the strength and ductility of metal structural materials, especially metal matrix composites. Herein, TiC/Ti‐6Al‐4V (TiC/TC4) composites with discontinuous network structures were in‐situ spark plasma sintered using reinforcement precursors of reduced graphene oxide to reinforce TC4 matrix. In order to investigate the hot deformation behaviors and mechanisms of Ti matrix composites, the designed TiC/TC4 composites were hot compressed over temperature range of 870 ∽ 1070 oC and strain range of 0.001 ∽ 10 s‐1. The results indicate the optimal processing window of hot deformation are mainly within the temperature range of 890 ∽ 970 oC and the strain rate range of 0.01 s‐1 ∽ 0.1 s‐1. The flow instability of TiC/TC4 composites occurs in the temperature range of 890 ∽ 930 oC and 1000 ∽ 1060 oC at the strain rate range from 0.1 s‐1 ∽ 10 s‐1. The thermal activation energies of TiC/TC4 composites in the (α+β) and β‐phase regions are 528.22 kJ/mol and 524.24 kJ/mol, respectively. The thermal deformation mechanism of TiC/TC4 composites in the processing window region involves a combination of continuous dynamic recrystallization (CDRX) and discontinuous dynamic recrystallization (DDRX). The pinning effect of TiC can effectively hinder the dislocation motion, leading to the generation of high‐density dislocations around TiC. Consequently, this promotes sub‐grains formation and rotation, facilitating CDRX. Meanwhile, TiC particle induces high‐angle grain boundary migration and provides more nucleation sites for recrystallized grains. Hence, TiC impedes the growth of recrystallized grains, promoting the formation of fine equiaxed grain through DDRX. These findings enhance understand the role of hot deformation behaviors of Ti matrix composites and provide insights for their deformation processing. This article is protected by copyright. All rights reserved.

In Situ Synthesis And Compressive Deformation Behaviors Of Tic Reinforced Magnesium Matrix Composites

In Situ Synthesis and Damping Capacities of Tic Reinforced Magnesium Matrix Composites

New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites

Study on in-situ synthesized magnesium matrix composites

NewIn-situ Synthesis Method of Magnesium Matrix Composites Reinforced with TiC Particulates

In-situ synthesis of TiC/Mg composites and its damping capacity

In situ synthesis method and damping characterization of magnesium matrix composites

The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates

Research of Mechanical Properties on In-Situ TiC/AZ91 Composites

Microstructure and Compressive Properties Ofin SituSynthesized TiC/Ti Composites

Strengthening Effects of Tic Particles and Microstructure Refinement in in Situ Tic-Reinforced Ti Matrix Composites

Mechanical Properties and Damping Capacity of Magnesium Matrix Composites

Microstructure evolution mechanism of micron particle reinforced magnesium matrix composite at room temperature

Microstructure And Compressive Properties Of In Situ Synthesized (Tib Plus Tic)/Ti Composites

Microstructure and Mechanical Properties of in Situ Synthesised (Tic+tib)/ti-6Al-4v Composites Prepared by Powder Metallurgy

Damping Characterization of Magnesium Matrix Composites Prepared by In-Situ Synthesis Technique

Microstructural Evolution and Deformation Mechanisms of in‐situ TiC Reinforced Ti‐6Al‐4V Composites during High‐Temperature Hot Compression

Microstructure and compressive properties of in situ synthesized (TiB + TiC)/Ti composites

Microstructure and Phase Evolution Characteristics of the In Situ Synthesis of TiC-Reinforced AZ91D Magnesium Matrix Composites

Microstructure Effect on Mechanical Properties of in Situ Synthesized Titanium Matrix Composites Reinforced with Tib and La2o3

Effect of aging hardening on in situ synthesis magnesium matrix composites