Abstract:Highlights • The grain refinement is improved by transforming the β-phase from continuous distribution to discrete distribution. • The strength of the (01-10)-based fibre texture initially decreases and then increases, increasing the plasticity of the material through improved DRX. • Schmid factors analysis reveals basal slip activation differences at varying extrusion ratios. In this study, AZ91D (Mg-9Al-Zn) alloys reinforced with 2 vol% TC4 (Ti–6Al–4 V) particles fabricated by semi-solid stir casting were extruded at different ratios, resulting in observed grain refinement effects. The research findings demonstrate that both TC4 and β-Mg17Al12 phases contribute to promoting dynamic recrystallization (DRX) nucleation. With increasing extrusion ratio, the β-phase (Mg 17 Al 12 ) gradually fractures into smaller particles, leading to progressive grain refinement. Furthermore, the transition from 〈01–10〉 fiber texture to non-basal texture in the α-Mg matrix after hot extrusion is attributed to improved DRX behavior and activation of non-basal slip. As the extrusion ratio increases, the tensile strength and elongation (EL) of TC4 p /AZ91D composite improve significantly, reaching optimum comprehensive mechanical properties at an extrusion of 40:1 with a yield strength (YS) of 257 MPa, an ultimate tensile strength (UTS) of 357 MPa, and an EL of 9.7%. This remarkable strengthening effect is primarily attributed to β-phase reinforcement, grain refinement strengthening, and strain hardening.

Synthesis and Characterization of Textured Ti2AlC Reinforced Magnesium Composite

Processing and Mechanical Properties of Ti<sub>2</sub>AlC MAX Phase Reinforced AE44 Magnesium Composite

Mechanical Properties and Toughening Mechanisms of Highly Textured Ti3AlC2 Composite Material

Anisotropic microstructures and mechanical properties of textured Ti3AlC2/TiAl3/Al composite

Fabrication of Textured Ti2AlC Lamellar Composites with Improved Mechanical Properties

New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

Microstructure, Mechanical Properties and Fracture Mechanism of Ti2AlC Reinforced AZ91D Composites Fabricated by Stir Casting

The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates

Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets

Influence of different extrusion methods on the microstructure, texture evolution and mechanical property of Ti /AZ31 composite

The Effect of Aluminum Content on Tio2 Coated Carbon Fiber Reinforced Magnesium Alloy Composites

Mechanical Properties and Damping Capacity of Magnesium Matrix Composites

In Situ Synthesis And Compressive Deformation Behaviors Of Tic Reinforced Magnesium Matrix Composites

Improvement of strength and ductility of TC4 p /AZ91D magnesium matrix composites by modifying the extrusion ratio

Effect of Solution Treatment on the Texture and Tensile Properties of Mg2B2O5w/2024Al Composite

Effect of Ti6Al4V reinforcement particles on the mechanical, wear, and corrosion properties of AZ91D magnesium matrix composites

Microstructure and mechanical properties of textured high‐entropy M4AlC3/Al2O3 (M = Ti, V, Mo, Nb, Ta) composites

Effects of Hot Extrusion on Microstructure and Mechanical Properties of Mg Matrix Composite Reinforced with Deformable TC4 Particles

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

The microstructure and tensile properties of the Ti 2 AlC reinforced TiAl composites fabricated by powder metallurgy