Abstract:Magnesium matrix composites reinforced with a network of TiC and TiB2 compounds have been successfully synthesized via an in-situ reactive infiltration technique. In this process, the ceramic reinforcing phases, TiC and TiB2, were synthesized in-situ from the starting powders of Ti and B4C without any addition of a third metal powder such as Al. The molten AZ91 magnesium alloy infiltrates the preform of 3Ti–B4C by capillary forces. Furthermore, adding different weight percentages of MgH2 powder to the 3Ti–B4C preforms was used in an attempt to increase the Mg content in the fabricated composites. The results reveal a relatively uniform distribution of the reinforcing phases in the magnesium matrix with very small amounts of residual Ti, boron carbide and intermediate phases when they are fabricated at 900 °C for 1.5 h using a 3Ti–B4C preform with 70% relative density. On the other hand, after adding MgH2 to the 3Ti–B4C preform, TiCx and TiB2 formed completely without any residual intermediate phases with the formation of the ternary compound (Ti2AlC) at the expense of TiC. The percentage of reinforcing phases can be tailored by controlling the weight percentages of MgH2 powder added to the 3Ti–B4C preform. The results of the in-situ reaction mechanism investigation of the Ti–B4C and Mg–B4C systems show that the molten magnesium not only infiltrates through the 3Ti–B4C preform and thus densifies the fabricated composite as a matrix metal, but also acts as an intermediary making the reaction possible at a lower temperature than that required for solid-state reaction between Ti and B4C and accelerates the reaction rate. The investigation of the in-situ reaction mechanism with or without the addition of MgH2 powder to the 3Ti–B4C preforms reveals similar mechanisms. However, the presence of the MgH2 in the preform accelerates the reaction resulting in a shorter processing time for the same temperatures.

Fabrication of (TiB2 − TiC)p/AZ91 magnesium matrix hybrid composite

The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates

Effect of Ti/B on fabricating TiB2p/AZ91 composites by employing a TiB2p/Al master alloy

Microstructure and Mechanical Properties of Hybrid AZ91 Magnesium Matrix Composite with Ti and SiC Particles

Understanding the reaction mechanism of in-situ synthesized (TiC–TiB2)/AZ91 magnesium matrix composites

New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites

The Effect of TiB2 Content on Wear and Mechanical Behavior of AZ91 Magnesium Matrix Composites Produced by Powder Metallurgy

Preparation and Performance of the Magnesium Matrix Composite Reinforced with Al2O3-SiO2 Short Fibers

Research of Mechanical Properties on In-Situ TiC/AZ91 Composites

Processing, microstructure and ageing behavior of in-situ submicron TiB2 particles reinforced AZ91 Mg matrix composites

Mechanical Properties and Damping Capacity of Magnesium Matrix Composites

Effect of Ti6Al4V reinforcement particles on the mechanical, wear, and corrosion properties of AZ91D magnesium matrix composites

AZ91D/TiB2 Nanocomposites Fabricated by Solidification Nanoprocessing

Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets

Influence of hybrid reinforcements on the mechanical properties and morphology of AZ91 magnesium alloy composites synthesized by ultrasonic-assisted stir casting

Microstructure, mechanical properties and wear resistance of Ti particles reinforced AZ31 magnesium matrix composites

Microstructure, mechanical properties and strengthening mechanisms of Mg matrix composites reinforced with in situ nanosized TiB2 particles

Processing, Microstructure and Mechanical Properties of Ti6Al4V Particles-Reinforced Mg Matrix Composites

Additively Manufactured High-Performance AZ91D Magnesium Alloys with Excellent Strength and Ductility Via Nanoparticles Reinforcement

Fabrication of SiC Particles-Reinforced Magnesium Matrix Composite by Ultrasonic Vibration

Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy