Abstract:Thanks to the need for refinement in the mold field, high-precision laser powder bed fusion (HP-LPBF) has become a critical technique for manufacturing new high-precision molds. The influence of HP-LPBF process parameters for densification of 18Ni300 maraging steel (MS18Ni300), as well as the related optical micrograph (OM), microstructure, phase composition, and mechanical properties of optimal relative density specimens, were comprehensively examined in this study. The sequence of HP-LPBF process parameters on the relative density of the specimens was investigated using the orthogonal experimental method. With a relative density of 99.18 ± 0.11 % and a surface roughness of 3.59 ± 0.32 μm, the optimal process parameters was attained. The influence of adding SiC on the specimens' OM, microstructure, phase composition, and mechanical properties were compared and studied. The results show that the building direction (BD) is the dominant heat flow direction in HP-LPBF by EBSD analysis and that the rotating 67° scanning strategy can effectively improve the isotropy of the mechanical properties of HP-LPBF parts. The MS18Ni300 specimen has a particularly thin cellular microstructures with a diameter of 6.11 μm. In addition, the dominant phase composition of the MS18Ni300 specimen was martensite (α). The microstructure of SiC (volume fraction of 1 %)/MS18Ni300 (M1) composites was significantly refined, and changes in the microstructure were primarily due to SiC's physical properties. The addition of SiC particles leads to a weakening of the preferred crystallographic orientation of the grains. The average grain size was 3.21 μm. No new phases were produced, but the mechanical properties were improved. The ultimate tensile strength and hardness of M1 were 1.33 GPa and 390.2 HV, respectively. The strengthening mechanism of SiC was discussed.

Strengthening Characteristics of Pearl Coated Sand Produced by Selective Laser Sintering

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Influence of Process Parameters on the Interlaminar Shear Strength of CF/PEEK Composites In-Situ Consolidated by Laser-Assisted Automated Fiber Placement

Microstructure Evolution and Mechanical Properties of Ceramic Shell Moulds for Investment Casting of Turbine Blades by Selective Laser Sintering

[Effect of different sandblasting conditions on the metal-ceramic bonding strength of Co-Cr alloy fabricated by selective laser melting technology]

Restraining warping of SLS sand mold via phenolic resin composites

Fabrication and posttreatment for inorganic binder jetting sand molds for casting

Effects of raw material ratio and post-treatment on properties of soda lime glass-ceramics fabricated by selective laser sintering

Mechanical Behavior of Cemented Sand Reinforced with Different Polymer Fibers

High-precision laser powder bed fusion of 18Ni300 maraging steel and its SiC reinforcement composite materials

Effects of processing parameters and post-process heat treatment on selective laser melted SiC/AlSi10Mg composites

The fabrication of fiber-reinforced polyamine-coated silica paste and the mechanical properties of SiO2/SiO2 composites via stereolithography combined with silica sol impregnation

Processing defect, microstructure evolution and mechanical properties of laser powder bed fusion Al-12Si alloys

Effects of particle grading on properties of silica ceramics prepared by selective laser sintering

Effect of heat treatment on compression properties of the 316L diamond structure fabricated through selective laser melting

Influence of Scanning Strategy and Post-Treatment on Cracks and Mechanical Properties of Selective-Laser-Melted K438 Superalloy

A Study on a New Type of High-Performance Resin-Coated Sand for Petroleum Fracturing Proppants

Research on Selective Laser Sintering Process of Limestone/Polyethersulfone Composites

Effects of process parameters on dimensional precision and tensile strength of wax patterns for investment casting by selective laser sintering

Influence of In Situ Laser Polishing on Pore Defects and Mechanical Properties of IN718 Alloy Fabricated by Selective Laser Melting

Investigation on the Attainment of High-Density 316L Stainless Steel with Selective Laser Sintering