Abstract:A new and simplified approach for making cathodes for microbial fuel cells (MFCs) was developed by using metal mesh current collectors and inexpensive polymer/carbon diffusion layers (DLs). Rather than adding a current collector to a cathode material such as carbon cloth, we constructed the cathode around the metal mesh itself, thereby avoiding the need for the carbon cloth or other supporting material. A base layer of poly(dimethylsiloxane) (PDMS) and carbon black was applied to the air-side of a stainless steel mesh, and Pt on carbon black with Nafion binder was applied to the solution-side as catalyst for oxygen reduction. The PDMS prevented water leakage and functioned as a DL by limiting oxygen transfer through the cathode and improving coulombic efficiency. PDMS is hydrophobic, stable, and less expensive than other DL materials, such as PTFE, that are commonly applied to air cathodes. Multiple PDMS/carbon layers were applied in order to optimize the performance of the cathode. Two PDMS/carbon layers achieved the highest maximum power density of 1610 +/- 56 mW/m(2) (normalized to cathode projected surface area; 47.0 +/- 1.6 W/m(3) based on liquid volume). This power output was comparable to the best result of 1635 +/- 62 mW/m(2) obtained using carbon cloth with three PDMS/carbon layers and a Pt catalyst. The coulombic efficiency of the mesh cathodes reached more than 80%, and was much higher than the maximum of 57% obtained with carbon cloth. These findings demonstrate that cathodes can be constructed around metal mesh materials such as stainless steel, and that an inexpensive coating of PDMS can prevent water leakage and lead to improved coulombic efficiencies.

The Use of Double-Sided Cloth Without Diffusion Layers As Air-Cathode in Microbial Fuel Cells

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells

Microbial Fuel Cell Cathodes with Poly(dimethylsiloxane) Diffusion Layers Constructed Around Stainless Steel Mesh Current Collectors

A Novel Structure of Scalable Air-Cathode Without Nafion and Pt by Rolling Activated Carbon and PTFE As Catalyst Layer in Microbial Fuel Cells.

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Increased Performance of Single-Chamber Microbial Fuel Cells Using an Improved Cathode Structure

The use of cloth fabric diffusion layers for scalable microbial fuel cells

Modification of carbon based cathode electrode in a batch-type microbial fuel cells

Air-cathode structure optimization in separator-coupled microbial fuel cells.

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Comparison of membrane- and cloth-cathode assembly for scalable microbial fuel cells: Construction, performance and cost

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Performance Improvement of Air-Cathode Single-Chamber Microbial Fuel Cell Using a Mesoporous Carbon Modified Anode

Development and Evaluation of Carbon and Binder Loading in Low-Cost Activated Carbon Cathodes for Air-Cathode Microbial Fuel Cells

Facilely Prepared Carbon Dots as Effective Anode Modifier for Enhanced Performance of Microbial Fuel Cells

Simultaneously Enhancing Power Density and Coulombic Efficiency with a Hydrophobic Fe–N4/activated Carbon Air Cathode for Microbial Fuel Cells

Enhanced Electricity Generation for Microbial Fuel Cell by Using Electrochemical Oxidation to Modify Carbon Cloth Anode

Waterproof Breathable Membrane Used As Gas Diffusion Layer in Activated Carbon Air Cathode Microbial Fuel Cells

High-Performance Carbon Aerogel Air Cathodes for Microbial Fuel Cells.

Nano-Fe3C@2D-NC@CC as anode for improving extracellular electron transfer and electricity generation of microbial fuel cells