Abstract:One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

Waterproof Breathable Membrane Used As Gas Diffusion Layer in Activated Carbon Air Cathode Microbial Fuel Cells

Microbial Fuel Cell Cathodes with Poly(dimethylsiloxane) Diffusion Layers Constructed Around Stainless Steel Mesh Current Collectors

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells

Long-term performance of activated carbon air cathodes with different diffusion layer porosities in microbial fuel cells

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Defect Free Rolling Phase Inversion Activated Carbon Air Cathodes for Scale-Up Electrochemical Applications

Poly(vinylidene Fluoride-Co-hexafluoropropylene) Phase Inversion Coating As a Diffusion Layer to Enhance the Cathode Performance in Microbial Fuel Cells

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

High‐Performance Carbon Anode Derived from Sugarcane for Packed Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Increased Performance of Single-Chamber Microbial Fuel Cells Using an Improved Cathode Structure

The use of cloth fabric diffusion layers for scalable microbial fuel cells

The buffer microporous layer improved water management for proton exchange membrane fuel cell at varying humidification

Microwave Preparation of Catalyst Layer for Enhancing the Oxygen Reduction of Air Cathode in Microbial Fuel Cells

Air-cathode structure optimization in separator-coupled microbial fuel cells.

Enhanced Activated Carbon Cathode Performance for Microbial Fuel Cell by Blending Carbon Black

Diffusion-layer-free air cathode based on ionic conductive hydrogel for microbial fuel cells

Rational design of carbon network structure in microporous layer toward enhanced mass transport of proton exchange membrane fuel cell