Abstract:Studying the dynamic failure of materials is crucial because this failure occurs extensively in mechanics and earthquake fields. However, obtaining the deformation and temperature fields in high-speed dynamic cases is challenging, particularly when analyzing the mechanics of thermo-mechanical coupling. This study developed a thermo-mechanical coupled in-situ measurement system to acquire synchronized information on the load, deformation, and temperature fields during a specimen dynamic failure process with high temporal and spatial resolution. In particular, the deformation field was obtained using a high-speed camera connected to a microscope that could achieve a spatial resolution of 3.6– 3.8μm /pixel and a temporal resolution of 1μs . Moreover, a 64 × 64 focal plane array infrared detector was developed to measure temperatures with a time resolution of 1μs . A Newtonian optical system was applied to achieve the infrared detector's spatial resolution of 25μm . The temperature measurement system could measure temperatures ranging from 100 to 800 °C. The split-Hopkinson pressure bar was used as the dynamic loading device to realize the high strain rate loading of a Ti-6Al-4V hat-shaped specimen, verifying the deformation and temperature measurement capabilities. The results from the Ti-6Al-4V specimen under dynamic loading showed an evident adiabatic shear band, and the temperature rise, suggesting that the experimental devices provided was an effective tool to study the thermo-mechanical response of materials under dynamic loading.

Tracking and Analysis of Aluminum Foam Deformations in SHPB Experiment by Using High-speed Camera

The Deformation Measurement and Analysis on Meso-Structure of Aluminum Foams During Shpb Test

Test of Aluminum Foam Deforming Process under Impact Load Based on Digital Image Correlation Method

Meso deformation characteristics analysis ofaluminum foam under impact

Deformation and stress nonuniformity of aluminum foam under different impact speeds

Deformation Process Study of Aluminum Foam at High Dynamic Temperature Based on SHPB

Features of Meso-Deformation and Failure of Aluminum Foam under Impact

Localized deformation in aluminium foam during middle speed Hopkinson bar impact tests

Numerical Analysis on Usability of SHPB to Characterize Dynamic Stress–Strain Relation of Metal Foam

Measurement of Dynamic Compressive Behavior of Aluminum-alloy Foams by Polycarbonate SHPB System

Numerical Analysis on the Reliability of Characterizing Dynamic Mechanical Properties of Metal Foam by SHPB Test

Experimental investigation on the strain-rate effect and inertia effect of closed-cell aluminum foam subjected to dynamic loading

Temperature Effects on the Mechanical Behavior of Aluminum Foam under Dynamic Loading

High-temperature dynamic deformation of aluminum alloys using SHPB

Experimental Study on Low-Speed Dynamic Response of Combined Aluminum Honeycomb

Full-field Transient 3D Deformation Measurement of 3D Braided Composite Panels During Ballistic Impact Using Single-Camera High-Speed Stereo-Digital Image Correlation

Development of a Robust High-Speed Videogrammetric Technique for the Measurement of Large-Scale Shaking Table Tests

Investigation into Deformation Characteristics of Aluminum Foam Using Digital-Image Processing Technology

Dynamic tensile deformation and fracture of a highly particle-filled composite using SHPB and high-speed DIC method

Synchronous in-situ measurement for deformation and temperature fields with high spatial and temporal resolution under dynamic loading

Investigation of Slipband Propagation in Aluminum Alloy with Dynamic Speckle Interferometry