Abstract:<p>Solid Expandable Tubular (SET) technology is a recent important breakthrough in petroleum exploration and drilling. The expansion forming theory and the constitutive model of the tubular materials are the theoretical basis for the development of this technology. This work focuses on establishing analytical and finite element models on the basis of the Twin Shear Stress (TSS) yield criterion to investigate the forming behavior of solid expandable tubular. The expansion force expression of the power exponential hardening material model was derived. A constitutive model using the TSS yield criterion and related flow rules was proposed and implemented into the ABAQUS software. Further to this, variations of the expansion forces, residual stresses and plastic deformation under different expansion ratios and friction coefficients were investigated. In addition, a tubular expansion experiment was conducted to validate the analytical and finite element solutions. Results show that the expansion force expression is reliable, but there are discrepancies within a reasonable range. The finite element model is capable of predicting the expansion forces, residual stress distributions, thickness reduction and length shortening accurately. Moreover, it is found that the expansion ratio should be controlled below 35% to avoid burst and collapse of the expandable tubular in practical application. For expansion operations, suitable lubrication conditions should be determined to ensure an acceptable expansion force and maintain a certain friction coefficient.</p>

Theoretical Calculation Method and Analysis on Residual Kiss Pressure during Hydraulic Tube Expansion

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Analysis of force and leakage in water hydraulic motor' s piston pairs

Modeling and analyzing on pressure distribution of plane port pair based on disk-shape gap

Determination of Expanding Pressure of Hydraulically Expanded Tube-to-Tubesheet Joint

Theoretical Analysis and Numerical Simulation on the Hydraulic Expansion of Double-Layered Tubes

Experimental Study on Double-layered Tube During Hydraulic Expansion

Modeling Hydraulically Expanded Tube-To-Tubesheet Joint Based on General Stress-Strain Curves of Tube and Tubesheet Materials

Expansion Order Effect on Residual Contact Pressure of Tube to Tubesheet Joint by Hydraulic Expansion

Investigation of the Compression and Expansion Process for Reciprocating Compressor

Analysis of the Pressure Expansion of Bridge Plug Tools and Packers by Equivalent Material Method

A Theoretical Study of the Expansion Metal Tubes

Discussion on the Hydraulic Expansion for the Tubes in Ultrathickness Tubesheet

Mechanical Expansion of Thick-Walled Microgroove Tube for High Pressure Acr System

Fluid-solid Coupling Analysis of the Pressure Expansion of Packers

Study on Mechanical Behavior of Expanding Tube-to Tubesheet and Joint Performance for Steam Generator of Nuclear Power

Analytical Model for Tube Hydro-Forging: Prediction of Die Closing Force, Wall Thickness and Contact Stress

Development and Model Analysis of an Expander for Transcritical CO_2 System

An Improved Two-Arcs Deformational Theoretical Model of the Expansion Tubes

Solid expandable tubular forming behavior based on twin shear stress yield criterion: Analytical, numerical simulation and experiment

Numerical Calculation of Static Holding Flow of Hydraulic Stepped Cylinder