Abstract:The spherical fuel elements are adopted in the high-temperature gas-cooled reactor pebble-module (HTR-PM). The fuel elements will be discharged continuously from the reactor core and transported into the fuel transport pipelines during the reactor operation, leading to spatially varying dose outside the pipeline. In this case, the dose evaluation faces two major challenges, including dynamic source terms and pipelines with varying lengths and shapes. This study tries to handle these challenges for HTR-PM through comprehensive calculations using the QAD-CGA program and to design the corresponding shielding of the pipeline. During the calculation, it is assumed that a spherical fuel element stays in different positions of the pipelines in turn, and the corresponding dose contributions were calculated. By integrating the dose contributions at different positions, the dose at the points of interest can be obtained. The total dose is further determined according to the assumed fuel elements transport speed of 5 m/s and total 6000 fuel elements transportation per day. Two types of fuel transport pipelines and two source terms were considered, i.e., the spent fuel element transport pipelines with corresponding spent fuel source term and the different burn-up fuel element transport pipelines with the average burn-up fuel source term. Doses at different points of interest were calculated with no shielding scenario and with lead shielding of different thicknesses scenario. To evaluate the shielding effect, the dose limit of the orange radiation zone of HTR-PM and the radiation damage thresholds from NCRP report No.51 were both adopted. The calculated results show that, for pipelines that transport the spent fuel, a 4 cm lead shielding will be enough. And for pipelines that transport fuel elements with different burn-up, a 5 cm lead shielding will be added. The method and results can provide valuable reference for other work of HTR-PM.

Shielding analysis for ITER equatorial bio-shield plug

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

Electromagnetic analyses and optimization for slit configuration of ITER blanket shield block

Activation analysis for ITER shielding blanket

Numerical Analyses of Electromagnetic Forces on the ITER Blanket Module Shield Block During Major Disruptions

Neutronics Analysis of the Upper Port for ITER

Shielding Design and Analysis for the Proton Tube of China Lead-Alloy Cooled Research Reactor (CLEAR-I)

RADIATION PROTECTION CALCULATION AND OPTIMIZATION FOR SHIELDING DESIGN AROUND THE REFUELING PIPELINES OF HTR-PM

Preliminary Shielding Analysis for HCCB TBM Transport

Primary Shielding Design and Analysis for Clear-I

Nuclear analyses for the integration of ITER equatorial Port 2

ShieldingDesignandDoseEvaluation forHTR-PMFuelTransport Pipelines by QAD-CGA Program

Nuclear analyses for the ITER Diagnostic Equatorial Port 8

Shielding Design and Dose Evaluation for HTR-PM Fuel Transport Pipelines by QAD-CGA Program

Numerical analysis on neutron shielding structure of ITER vacuum vessel

Total ionizing dose estimation of ITER upper port remote handling equipment

Preliminary Design and Analysis of ITER In-Wall Shielding

Nuclear analysis for the Test Cell Lithium System Interface Cell during operation and shutdown

Neutronic Analyses of Port Impact on Blankets and Superconducting Coils of CFETR

Radiation environment in ITER tokamak equatorial port 11

Analysis of Radiation Conditions in the CFETR Ion Cyclotron Resonance Heating Antenna