Abstract:Abstract The fusion plasma is sensitive to the penetration of the toroidal mode numbers n harmonic components of the error fields (EFs), and the toroidal mode components of the EFs are closely tied to the toroidal distribution of the magnetic field source. The primary source of EFs within the magnetic field sources is the current source, such as the magnet system, while the magnetic field produced by magnetized ferromagnetic materials may also generate EFs. The ferromagnetic field source, such the reduced-activation ferritic-martensitic (RAFM) steel, represent a smaller portion of the EFs source. However, the use of ferromagnetic materials is expected to increase significantly as tokamak research transitions from experimental devices to demonstration and commercial reactors, particularly for the structural materials of in-vessel components and port plugs. Predictably, the EFs induced by ferromagnetic materials will increase and may even surpass the design specifications. In this study, the water-cooling ceramic breeder (WCCB) blanket system of China Fusion Engineering Test Reactor (CFETR) and the EFs introduced by the vacuum vessel port plugs are comprehensively analyzed by an analytical approach and finite element numerical approach, which is based on the Fourier decomposition. The results reveal a clear linear relationship between the EFs formed by the saturated magnetization module and its rigid displacement deviating from periodic symmetry, as well as the same behavior in EFs and overall magnetization intensity. Compared to the assembly error of the blanket system, the EFs that may be introduced by the equatorial ports and plugs are substantial, including larger n≤3 toroidal mode harmonic components that can lead to lock mode and disruption. Moreover, using the correlation between harmonic components and symmetrical periods, specific toroidal mode components can be selectively shielded.

Radiation environment in ITER tokamak equatorial port 11

Nuclear analyses for the ITER Diagnostic Equatorial Port 8

Nuclear analyses for the integration of ITER equatorial Port 2

Total ionizing dose estimation of ITER upper port remote handling equipment

Radiation induced non-linear oscillations in ITER baseline scenario plasmas in DIII-D

Neutronics Analysis of the ITER In-Vessel Viewing System

Irradiation test of diagnostic components for ITER application in the Japan Materials Testing Reactor

Nuclear analysis and shielding optimisation in support of the ITER In-Vessel Viewing System design

Survey and Test Environment for ITER EPP#12 Electrical Components

MCNP Models for Tokamak Cooling Water System Equipment Evaluations

Effects of runaway electrons on plasma facing components

Tritium management in ITER Test Blanket Systems port cell for maintenance operations

Laser and microwave instrumentation for ITER and future reactors

Detecting Neoclassical Tearing Modes in high-temperature ITER plasma scenarios with the ITER prototype Electron Cyclotron Emission Diagnostic

Modelling of the NBI contribution to the neutron energy spectra for the ITER Vertical Neutron Camera

Power and isotope effects in the ITER Baseline Scenario with tungsten and tungsten-equivalent radiators in DIII-D

Time-dependent full-radius integrated modeling of the DTT tokamak main plasma scenarios

Measurements of ITER Fusion Power by Neutron Flux Monitors

The effect of blanket system and port plugs on the harmonic components of error field and optimizing approach investigation

Impact of nuclear heating distribution on the structural behavior of ITER first wall panel 11

Finite element models for radiation effects in nuclear fusion applications