Tritium management in ITER Test Blanket Systems port cell for maintenance operations

Yingwu Jiang,Jiewei Wu,Fuhao Ji,Yuqing Wang,Muyi Ni,Man Jiang
DOI: https://doi.org/10.1088/1741-4326/ad43fa
IF: 3.3
2024-04-28
Nuclear Fusion
Abstract:Four Test Blanket Systems (TBS) will be tested in the International Thermonuclear Experimental Reactor (ITER) equatorial ports #16 and #18 to verify tritium breeding and heat extraction technology. A significant quantity of tritium would be produced in TBM, and partly released into the port cell from the pipework of TBS or other high-temperature components due to its strong mobility and high permeation. The port cell should be accessible during equipment maintenance and human intervention. This work built a multi-dimensional geometric model to characterize HTO transport in the port cell, absorption/desorption, and diffusion in walls and discussed the effect of paint thickness, ventilation rate, source term, and epoxy properties on detritiation efficiency. The results suggest that a 0.1-0.16 mm paint with the lowest HTO solubility is optimal from the compromise between quick cleanup and tritiated waste decommission. A higher ventilation rate could accelerate detritiation while minimizing the radioactive source by a tritium-resisting layer is the most direct method. The optimized design options for reducing the time required to reach 1 DAC in 12 h still need further discussion because of the delayed HTO source from epoxy paint and dead zone of the flow field.
physics, fluids & plasmas
What problem does this paper attempt to address?