Analysis of mechanical properties and joint selection for secondary linings in drill and blast tunnels with prefabricated invert arch: Case study of a single-line railway tunnel
Chao Kong,Xinqiang Gao,Fei Wang,Haiyan Wang,Haoming Li,Xiaoyong Zhao,Jianhong Liu,Yucheng Zhang,Yunfei Luo
DOI: https://doi.org/10.1016/j.tust.2023.105560
IF: 6.9
2023-12-18
Tunnelling and Underground Space Technology
Abstract:Prefabricated lining technology for drill and blast tunnels still has numerous unresolved issues. A novel secondary lining structure that combines a prefabricated inverted arch with a cast-in-place structure suitable for application in drill and blast tunnels is proposed. A single-line Dujuan Mountain railway tunnel was used as a case study. To address the joint connection strength and construction feasibility, four joint types were introduced: (1) connecting the reinforcement, (2) Z-joint, (3) V-joint, and (4) I joints. Large-scale geological model tests were conducted to simulate the stress environment of the secondary lining under the constraining effect of surrounding rock. To reflect the nonlinear mechanical properties of the novel lining, a three-dimensional finite element numerical model was established using a plastic damage model and structural interface interaction. To validate the process, the numerical analysis results were compared with experimental data. Damage evolution, surrounding rock pressure, inner force, and bearing capacity of novel lining with four joints were analyzed. The results indicated that the application of the surrounding rock restraint effectively reduced the bending moment on the joint. The I-joint primarily experienced compression and shear damage, with the joint opening on the side closer to the surrounding rock. The damage evolution process of the novel lining was significantly influenced by the joint configuration. Among the joint types, the connecting reinforcement joint exhibited the largest concrete damage area and most damage patterns, owing to its well-designed joint structure. The secondary lining can be safely operated using a connected reinforcement joint and a Z-joint. Considering the structural safety and construction convenience, it is suggested that Z-joints can be used for novel secondary linings.
construction & building technology,engineering, civil