Abstract:Optimization of direct methanol fuel cell(DMFC) temperature and flow rate can effectively prevent cathode "flooding", reduce the adverse effects of methanol crossover on cathode reaction, therefore, it is critical to improve the performance of DMFC. In this paper, we reduced the cathode catalyst loading to strengthen electrochemical polarization of DMFC cathode oxygen reduction reaction, and measured polarization curves and electrochemical impedance under different operating conditions. Moreover, an improved equivalent circuit model LR(CR) (QR(LR)) is built to fit the measured spectrum to analyze the effect of operating parameters Such as temperature, air flow rate, methanol flow rate on the cathode electrochemical reaction and mass transfer polarization process of DMFC under the full cell conditions. The results show that: increasing temperature will lead to more methanol to permeate to the cathode, and increase the charge transfer resistance of cathodic oxygen reduction reaction; and only using the high air flow can effectively prevent cathode flooding, and improve oxygen mass transfer to the catalyst; appropriately increasing the flow of methanol can promote the electrochemical reaction of DMFC, but the excessive flow of methanol may lower electrode surface temperature, increase penetration of methanol, therefore adversely affect oxygen reduction reaction.

Electrochemical Reactions in a DMFC under Open-Circuit Conditions

A Study of the Direct Dimethyl Ether Fuel Cell Using Alkaline Anolyte

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

Effect of operating condition on cathodic EIS parameters in a DMFC

Anode reaction mechanism and crossover in direct dimethyl ether fuel cell

In-Depth Understanding of Oxygen Transfer in the Catalyst Layer of High-Temperature Proton Exchange Membrane Fuel Cells

In-situ Investigation and Modeling of Electrochemical Reactions with Simultaneous Oxygen and Hydrogen Microbubble Evolutions in Water Electrolysis

Influence and Mechanism of Dissolved Oxygen on the Performance of Ammonia-Oxidation Microbial Fuel Cell

A Methanol Fuel Processing System with Methanol Steam Reforming and CO Selective Methanation Modules for PEMFC Application

Electrochemical impedance spectroscopic studies of non-fluorinate proton exchange membranes in Dmfc

Experimental Investigations of the Anode Flow Field of A Micro Direct Methanol Fuel Cell

The function of microporous layers and the interaction between the anode and cathode in DMFCs. Part I: The double roles of microporous layers in DMFCs

Effect of Methanol Concentration on Performance of Passive DMFC

Study on stability of self-breathing DFMC with EIS method and three-electrode system

Research of Ac Impedance of Dynamic Behavior of Direct Methanol Fuel Cell

In-situ Analysis of Anode Atmosphere in a Flat-Tube Solid Oxide Fuel Cell Operated with Dry Reforming of Methane

Toward Electrocatalytic Methanol Oxidation Reaction: Longstanding Debates and Emerging Catalysts

Self-Flooding Behaviors on Fuel Cell Catalyst Surface: An In-Situ Mechanism Investigation

Enhancing the life of direct methanol fuel cell

Performance of Air Breathing Direct Methanol Fuel Cell under Ambient Condition

Research and Development of Electrocatalysts Used in DMFC