Abstract:In this paper, a novel point grinding wheel (NPGW) with coarse grinding area angle θ is proposed. According to earlier studies, this type of grinding wheel has the advantages of high grinding efficiency, a long service life, and very little surface roughness generated. The contact zone between the grinding wheel and workpiece is modified by the addition of the NPGW with the coarse grinding area angle θ and the inclining angle α of the point grinding process, and as a result, the grinding zone temperature is also altered. Using the finite element method, the grinding zone temperature can be simulated based on the theory of grinding heat generation and distribution, and the triangular heat source distribution model. From this, the distribution of the point grinding temperature field and influence of different grinding parameters on the grinding zone temperature were obtained. To verify the simulation, thermocouple measurements for different NPGWs were taken during the grinding experiments. The simulation provides an auxiliary and predictive method for the actual process. Moreover, an L16(45) orthogonal experiment was designed. Analyzing this range, primary and secondary factors affecting grinding zone temperature, and the optimum combination of parameters for reducing the grinding zone temperature, are determined. Finally, the grinding heat can affect the quality of the workpiece subsurface; therefore, the influence of the various parameters on subsurface quality, including metallographic structure, work hardening, and residual stress, was studied. In conclusion, the NPGW and point grinding process can reduce the degree of work hardening and residual stress of the subsurface of the workpiece, and it was demonstrated that the residual stress changes from compressive to tensile with increasing depth.

Study on Effects of Grinding Speed on Finish and Precision Machining in Quick-Point Grinding

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Theoretical Generalization and Research on the Mechanism of the Unsteady-State Grinding Technique

Surface Characteristics and Roughness Prediction of TC4 Titanium Alloy in High Speed Grinding

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Research on the System Matching Model in Ultrasonic Vibration-Assisted Grinding

Influence of Thermal-mechanical Coupling of Single Particle on Grinding Surface Roughness

Experimental Analysis of Process Parameter Effects on Vibrations in the High-Speed Grinding of a Camshaft

Influence of Kinematic Characteristics on Grinding Ultra-Precision Substrates

Study on micro-grinding quality in micro-grinding tool for single crystal silicon

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Establishment of dynamic grinding force model for ultrasonic-assisted single abrasive high-speed grinding

Interference and grinding characteristics in ultra-precision grinding of thin-walled complex structural component using a ball-end grinding wheel

Investigation on nano-grinding process of GaN using molecular dynamics simulation: Nano-grinding parameters effect

Study on the effect of the strengthen grinding process surface coverage on the micro-morphology, micro-hardness, roughness, and residue stress of GCr15 bearing steels

Experimental Study of Time-Dependent Performance in Superalloy High-Speed Grinding with Cbn Wheels

Analysis, Modeling and Experimental Study of the Normal Contact Stiffness of Rough Surfaces in Grinding

Investigation of the grinding temperature and subsurface quality of a novel point grinding wheel

Time Dependent Behavior Analysis of Inconel 718 in High Speed Grinding Process

Experimental Study for Optimizing Superfinishing Process Parameters of High-Quality Alloy Bearing Steel