Abstract:The application of hard and brittle materials such as single-crystal silicon in small parts has expanded sharply, and the requirements for their dimensional accuracy and processing surface quality have been continuously improved. This paper proposes using mechano-chemical micro-grinding tools to process single-crystal silicon, which can realize the high-quality and efficient processing of such tiny parts through mechano-chemical composite action. The microstructure composition of the mechano-chemical micro-grinding tools was designed, the theoretical analysis model of grinding force was established and verified by experiments, and the temperature field distribution during mechano-chemical micro-grinding of single-crystal silicon was simulated and studied, which provided a theoretical basis for mechano-chemical action. Special micro-grinding tools were developed, and mechano-chemical micro-grinding processing tests were carried out. The results show that the coupling synergy of grinding force and grinding temperature improves the chemical activity of the micro-grinding tools, thereby promoting the solid–solid phase chemical reaction of abrasives and additives at the sharp points of the surface of the micro-grinding tools. And when the content of cerium oxide abrasive is 25%, it is more conducive to the solid–solid phase chemical reaction, and calcium oxide can be used as an additive to promote the active agent of solid–solid phase chemical reaction, improve the degree of chemical reaction, and thus improve the removal rate of materials. Soft reactants that are easy to remove are generated on the surface of monocrystalline silicon and are removed by the mechanical friction between the abrasive grain and the surface of the silicon wafer, and finally achieve low-damage processing with a surface roughness of Ra1.332 nm, which is much better than the surface roughness of Ra96.363 nm after diamond abrasive processing.

Study on micro-grinding quality in micro-grinding tool for single crystal silicon

Studies on the Surface Quality of the Unsteady-State Grinding Technique

Influences of grinding parameters on flexural strength in the grinding of Li-spinel ferrites with electroplated diamond wheel

Experimental Research on the Effect of Grinding Parameters on Ceramic Machined Surface Roughness

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Influences of Grinding Parameters on Forces in the Grinding of Microwave Ferrite Ceramic with Electroplated Diamond Wheel

Study on Preparation and Processing Properties of Mechano-Chemical Micro-Grinding Tools

Research on micro-grinding performance of 2.5D Cf/SiC composites

Investigation of machining mechanism of monocrystalline silicon in nanometric grinding

Mechanism analysis and process optimization of nanogrinding single-crystal SiC

Surface generation mechanism in ultra-fine microgrinding (UMG) of single crystal silicon considering grinding tool topography

Investigation on nano-grinding process of GaN using molecular dynamics simulation: Nano-grinding parameters effect

Study on micro-grinding mechanism and surface quality of hardened 20 vol% SiCp/Al composites

Analysis and optimization of microchannel array precision grinding processes with micro-structured micro-grinding tool

Analytical and experimental study on micro-grinding surface-generated mechanism of DD5 single-crystal superalloy using micro-diamond pencil grinding tool

Study on force and temperature characteristics of micro-grinding nickel-based single-crystal superalloy

Effect of grinding damage on cutting force and ductile machining during single grain scratching of monocrystalline silicon

Novel designed mechanical-mechanochemical synergistic micro-grinding technology and compounded abrasive micro-grinding tools

Modeling and experimental study on the grinding performance of precision diamond grinding tool with defined texture

Effects of grinding speeds on the subsurface damage of single crystal silicon based on molecular dynamics simulations