Abstract:Purpose The purpose of this study is to investigate the influence of surface texture on the subsurface characteristics of contact interfaces under elastohydrodynamic lubrication condition. As a typical contact form of gears and bearings, the optimization of friction characteristics at the elastohydrodynamic lubrication (EHL) interface has attracted the attention of scholars. Laser surface texturing is a feasible optimization solution, but there have been concerns about whether the surface texture of high-pair parts will affect their fatigue life. Design/methodology/approach To examine the impact of texture preparation on the subsurface characteristics of high-pair interfaces under EHL conditions, a point contact EHL model is developed that takes into account the effect of textured surface topography. The pressure and thickness of the oil film are calculated as input parameters under different loads and entrainment velocities. The finite element method is used to simulate the impact of textures with varying diameters, densities and depths on the subsurface characteristics of the elastohydrodynamic interface. According to ISO 25178, analyze the relationship between 3D topography parameters and subsurface characteristics and study the trend of friction characteristics and subsurface characteristics based on the results of the ball on disc friction tests. Findings The outcomes suggest that under different rotational velocity and load conditions, the textured surfaces exhibit improved friction reduction effects; however, the creation of textures can result in significant subsurface plastic deformation and local peeling. The existence of texture makes the larger stress zone in the subsurface layer closer to the surface, leading to fatigue failure near the surface. Reasonable design parameters can help enhance the attributes of the subsurface. A smaller Sa and a Str greater than 0.5 can achieve ideal subsurface properties on the textured surface. Originality/value This paper investigates the influence of surface texture on the friction and subsurface characteristics of EHL interfaces and analyzes the impact of surface texture on interface contact performance while achieving lubrication improvement functional characteristics. The results provide theoretical support for the optimization design and functional regulation of surface texture in EHL interfaces. Peer review The peer review history for this article is https://publons.com/publon/10.1108/ILT-10-2023-0324/

The Study of the Maximum Static Friction of Surface Topography in Starved-oil Lubrication

Friction-reduce experiment of the surface profile on plane-plane contact and oil-lack lubrication

Friction behaviors of rough chromium surfaces under starving lubrication conditions

Experimental Investigate of the Wear and Friction Performance Considering Effects of Surface Topography and Lubricant

Effect of surface roughness on sliding friction in lubricated contacts-reciprocal experiment study

Experimental research of sliding friction coefficient of rough surface under lubricated point contact

The Friction-reduce Effect with Different Depth of Concave on the Oil-lack Lubrication

Tribological and Lubrication Properties of Sandblast-Textured Surfaces with Varied Roughness

Experimental investigation for vibration reduction of surface-textured journal bearings

Numerical and Experimental Study of a Sector-Shaped Surface Texture in Friction Reduction

A Textured Surface with Oil Inflow and Outflow Function Designed for Starved Lubrication

Study on Tribological Behavior of Grooved-Texture Surfaces under Sand–oil Boundary Lubrication Conditions

Tribological Properties of V-Shaped Surface Texture under Oil Lubrication Condition

A Pocket-Textured Surface for Improving the Tribological Properties of Point Contact under Starved Lubrication

Effect of Surface Topography and Structural Parameters on the Lubrication Performance of a Water-Lubricated Bearing: Theoretical and Experimental Study

Study of grease lubricated journal bearing with partial surface texture

Study on the subsurface characteristics of textured surfaces under EHL condition

Study on the Surface Quality of Finished by Abrasive Jet with Grinding Wheel as Restraint

Effects of Surface Roughness on Sliding Friction in Lubricated-Point Contacts: Experimental and Numerical Studies

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress

Frictional Characteristic Curves of Ground Surfaces in Lubricated Sliding